Conference - ABES ENGINEERING COLLEGE | Rank 1 in AKTU

Mechanical Engineering

Conferences

Department activities in odd sem 2018-19

  • Department of Mechanical Engineering had organized an International conference on advances in business and engineering for sustainability (ABES-2018), in association with Department of Electrical and Electronics Engineering and Department of Business Administration. The two days conference was scheduled from 27th to 28th March 2018, in which we received an overwhelming response from researchers from various national and international institutes. After reviewing all the papers, a total of 95 full length papers were selectedfor presentations and published by UGC approved journals.

     

    con1Figure 1: Conference (ABES-2018)

    con1Figure 2: Conference (ABES-2018)

  • Mr. Ravi Shankar Raman(Sr.Asst.Professor)research paper  titled “DMAIC Approach for Road Well-being: A Case Study”was accepted in "International Conference on Recent Trends in Engineering & Sciences"  on 10thand 11th Feb-2018  and AIP-ICRTES conference Proceeding is  indexed by  Scopus (Elsevier).
  • Mr. Ravi Shankar Raman (Sr.Asst.Professor) research paper titled “A Six Sigma application for the reduction of defects in a capacitor manufacturing process: A case study“, was Presented in International Conference on Recent Advances in Materials, Mechanical on 1st& 2nd June 2017 and Conference Proceeding is accepted for publishing in Applied Mechanics and Materials Journal (Abstracted/Indexed in SCImago Journal & Country Rank (SJR).

International/National Conference 2018

  • All faculty members of Mechanical Engineering department attended and organized International Conference on Advances in Business and Engineering for Sustainability (Abes2018) in ABES EC From 27-28 March 2018.
    Mr. Ravi Shankar Raman research paper titled “DMAIC Approach for Road Wellbeing: A Case Study “ was accepted in “International Conference on Recent Trends in Engineering & Sciences” on 10th and 11th Feb-2018 and AIP-ICRTES conference Proceeding is indexed by Scopus (Elsevier).

International/National Conference 2017

  • Mr. Ravi Shankar Raman research paper titled “A Six Sigma application for the reduction of defects in a capacitor manufacturing process: A case study“, was Presented in International Conference on Recent Advances in Materials, Mechanical on 1st& 2nd June 2017 and Conference Proceeding is accepted for publishing in Applied Mechanics and Materials Journal (Abstracted/Indexed in SCImago Journal & Country Rank (SJR).
  • Ankur Dixit. Et. al. , Transient response of two lobe aerodynamic journal bearing, ITS-IFToMM/K- TIS 2017, 19-22 March 2017, Jeju, South Korea.
  • Ravi Shankar Raman and Dr.Yadavalli basavaraj, “A SIX SIGMA APPLICATION FOR THE REDUCTION OF DEFECTS IN A CAPACITOR MANUFACTURING PROCESS: A CASE STUDY”, International Conference on Recent Advances in Materials, Mechanical on 1st& 2nd June 2017 and Conference Proceeding is accepted for publishing in Applied Mechanics and Materials Journal.
  • Ravi Shankar Raman and Dr.Yadavalli Basavaraj, “Analysis of Six Sigma Methodology in Exporting Manufacturing Organizations and Benefits Derived: A Review“, Presented in IEEE International Conference on Feb. 9th & 10th 2017 and Conference Proceeding is published in IEEE Xplore Digital Library.

International/National Conference 2016

  • Dharmendra Singh, Abhishek Sharma “Multi-objective optimization of performance and emission parameters of CI engine fuelled with Polanga biodiesel at different injection pressures”, Innovative concepts in Mechanical Engineering,, 29-30 April 2016 (ICME-2016).
  • Dharmendra singh, Abshiek Sharma, “Resistance distance method for determination of least stiffens and rigidity among planar kinematic chains and their derived mechanisms”, Innovative concepts in Mechanical Engineering, 29-30 April 2016 (ICME-2016).
  • Malik, A., Garg, P.K. “Performance Evaluation of an IC Engine Fuelled with Blends of Diesel and Butanol.” International Conference on Manufacturing Excellence at Amity University, Noida,2016.
  • Malik, A., Garg, P.K. “Economic Analysis of Using Different Biomass Fuels in a Dual Fuel Engine.” International Conference on Manufacturing Excellence at Amity University, Noida,2016.
  • Malik, A., Singh, N.P., Garg, P.K. “Economic analysis of producing biogas from rural Waste-A case study.” International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering at PTU Jalandhar,2016.
  • Atul Kumar Sharma, Abhishek Pandey, Dharmendra Kumar Shukla, K.N.Pandey, “Effect of Self – Healing Dicyclopentadiene Microcapsules on Fracture Toughness of Epoxy”International Conference on Smart Engineering Materials (ICSEM-2016,RVCE Bangalore, Karnataka. (To be published in Materials Today Proceedings, Elseveir)\ ), 20-22 October 2016.

International/National Conference 2015

  • Saurabh, J.S.Jassi, Dr.Aas Mohammad, D.P.Singh, Hasan Zakir Jafri, “MACHINING PARAMETER OPTIMIZATION USING TAGUCHI APPROACH”, International Conference on “Futuristic Trends in Computational analysis and Knowledge management, (A-BLAZE 2015) Feb 25-27, 2015, Amity University, Greater Noida, India.
  • Sikarwar, B. S., Shukla, R. K., Sharma, S. K. & Dr. Priya Ranjan , “Parametric study of Sessile drop Evaporation at atmospheric condition” 17th ISME Conference on advances in Mechanical Engineering at IIT Delhi, January 2015.
  • Ravi Shankar Raman,”To Reduce the Rejection Level of Chassis 260L by using Six Sigma Tools”, Presentedin International Conference on Advanced Developments in Engineering Technology on Feb 21st &22nd 2015.

International/National Conference 2014

  • Dharmendra singh, Aas Mohammad, R. A. Khan “ Joint Resistance method for determination of isomorphism among planar kinematic chains and their derived mechanism” National Conference on Recent Advances in Manufacturing Technology Ajay Kumar Garg Engg college, 5-6 April 2014.
  • Kushwaha, Mayank,&Saini, P.K.,“AN ANALYTICAL APPROACH TO REDUCE THE STRESS CONCENTRATION AROUND A CIRCULAR HOLE IN A FUNCTIONALLY GRADED MATERIAL PLATE USING POWER – LAW INDEX”,National Conference on Recent Trends in Chemical Sciences, Engineering and Technology (RTCET – 2014), NIT Hamirpur, 2014.
  • Analysis of Fluid flow and thermal behavior of Jet plate solar air heater with inline holes” in AITE- 2014 National Conference at ISM. Abhishek Kr Goel& S.N Singh. December-2014.

International/National Conference 2013

  • Dharmendra singh, Aas Mohammad , “Detection of Isomorphism among Kinematic Chains by Assigning type number of different joints” International Conference on Manufacturing Excellence Amity University, 30-31 May 2013.
  • Dharmendra singh, Aas Mohammad, R. A. Khan, “Resistance distance method for determination of isomorphism among planar kinematic chains and their derived mechanism” National Conference on Manufacturing Excellence Alfela engg college , 30-31 Aug 2013.
  • Malik, A., Garg, P.K. “Performance evaluation of a spark ignition car engine fuelled by gasoline-ethanol blends.” International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering at PTU Jalandhar,2013.
  • Malik, A., Garg, P.K. “Solid Waste Disposal In Urban Areas: A Threat To Environment.”International Conference on Manufacturing Excellence at Amity University, Noida,2013.
  • Experimental Investigation on Heat Transfer Enhancement through Transverse Rectangular Grooved Fin, National Conference on Emerging Trends in Energy Engineering. DIT Dehradun ,Abhishek Kr Goel& Sunil Chamoli. MARCH-2013.
  • Effect of roughness parameters on Heat Transfer Enhancement through return flow solar air heater, National Conference on Emerging Trends in Energy Engineering. SRM University NCR Campus. Abhishek Kr Goel& Sunil Chamoli . MARCH-2013.
  • Ravi Shankar Raman,“ Optimization of Process using Robust Design”, Presented in National Conference on Technology Advancements Stepping Towards Sustainable Development”, on April 29, 2013.
Brochure Form

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

X
Brochure