Publications - ABES ENGINEERING COLLEGE | Rank 1 in AKTU

Mechanical Engineering

Research Publication 2018-19

  • Prof. (Dr.) Rajendra Kumar Shukla (2019), “Development of AHP framework od sustainable product design & manufacturing of electric vehicle”, Springer nature Singapore pte. Ltd.,
  • Prof. (Dr.) Dharmendra Singh (2018), “Design of fixed wing unmanned aerial vehicle based on magnificent frigated”, International Journal of engineering & technology, 165-168
  • Prof. (Dr.) Dharmendra Singh (2018), “Approach for machine Health Monitering System of a Machine”, International Journal of engineering & technology7 (4.39), 441-446
  • Dr. Pikesh Bansal (2018), “Structure and Thermal Analysis of Ball Control Valve: A Review”, Recent Tyrends in Fluid Mechanics (STM Journals)Volume-5, Issue 2, 2455-1961
  • Dr. Pikesh Bansal (May-June 2019), “Design and fabrication of Automatic Speed Controller for Automobile”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Dr. Yogesh Chandra (2018), “The Use of Dielctric Elastomer Actuators for Prosthetic, Orthotic and Bio-Robotic Applications”, Science Direct Elsevier Ltd.proceediya computer sci. 133 (2018), PP 569-575
  • Dr. Anuj Kumar Jain (43610), “Optimize and Validate the Wind Induced Deflection of Process Column in Offshore Oil and Gas Industry”, Journal of Scientific & Industrial ResearchVol. 78,
  • Mr. R.S . Raman (2018), “DMAIC Approach for Road Well being : A case Study”, International Journal of Enginering & TechnologyVolume-07, No 4.5 (2018) 8-11
  • Mr. R.S . Raman (2018), “Defects Reduction in a capacitor manufacturing process through six sigma concept:A case study”, International Journal of six sigma and Competitive Advantages(Volume 9 Issue 2, ISSN 1923-9343(online) ISSN 1923-9335 (Print PP-253-260, 2019
  • Mr. R.S . Raman (2019), “A Review on Implementaion of six sigma techniques I Manufacturing Industries and Benefits derived.”, Springer Nature IJITJ/IOP Publication Science Journals,
  • Dr. Manish Saraswat (2018), “Assessment study of Butanal-Gasoline Blends in Variable Compression Ratio Spark Ignition Engine”, Journal of Scientific & Industrial ResearchVolume-77 July 2018, 0022-4456 PP 405-409
  • Dr. Manish Saraswat (2018), “Performance and Emission Analysis of Different Alcoholic Blended Fuels in Spark-Ignition Engines”, Journal of Alternate Energy Sourses and Technologies.(STM Journals)Volume-9, Issue 2 2018, 2230-7982 (online) 2321-5186(Print)
  • Dr. Manish Saraswat (2018), “Mathematical Modeling of Electromagnetic Induction Coilgun for Non-lethal Self-defense Applications”, Journal of Experimental & Applied Mechanics Volume 9, Issue 2 , ISSN: 2230-9845 (Online), ISSN: 2321-516X (Print)
  • Dr. Manish Saraswat (43800), “Perfoarmanence of Evaluation of Algae Oil- Gasoline Blends in Variable Compression ratio spark ignition Engine”, Journal of Scientific & Industrial ResearchVolume -77, PP 723-727
  • Dr. Manish Saraswat (), “Comparative assessment of butanol and algae oil as alternate fuel for SI engine engines”, Engineering Science and Technology, an International Journal,
  • Dr. Manish Saraswat (2019), “Potential assessment og biogas in internal combution engine: A review”, International Conference on Computaional & Experimental methods in mechanical engneering,
  • Dr. Manish Saraswat (2019), “Impact of Varibale affecting biogas production from biomass”, International Conference on Computaional & Experimental methods in mechanical engneering,
  • Dr. Manish Saraswat (43617), “Environment Impact of butanol & algae oil addition in gasoline at different compression ratio”, Journal of scientific & Industrial ReaseachVolume- 78,, PP 382-385
  • Mr. Abhishek Goel (43580), “Experimental study of heat transfer characteristics of an impining jet solar air heater with fins”, Springer, Print ISSN 1387-585X Online ISSN 1573-2975
  • Mr. Abhishek Goel (), “Energy and performance analysis of a new solar dryer”, International Conference on Computaional & Experimental methods in mechanical engneering,
  • Mr. Yogesh Chandra Mr. Parag Sighal (2019), “Factors to Increase the Efficiency of Solar Panel:A Rewiev”, Journal of Energy, Environment & Carbon Credits Volume 9, Issue 1 , ISSN: 2249-8621 (Online)
  • Mr. Shivam Sharma (), “Optimization/benchmarking using multi criteria Decision making”, Intech Open Limited,
  • Mr. Shivam Sharma (43586), “Design and Implementation of Advanced Helmet”, International Journal of Research in engineering & Management(IJRESM)Volume-2, Issue- 5, ISSN (online): 2581-5792
  • Mr. Shivam Sharma (May-June 2019), “Regenerative Breaking System”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Dr. Kishor Kumar Guru (43593), “Effect of temperature on elastic properties of CNT reinforced nanocomposites”, IOP Publishing Ltd,
  • Dr. Kishor Kumar Guru (May-June 2019), “Design and working of pedal operated flour mill”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Mr. Manish Mangal (2019), “Finite Difference Analysis of Plane Couette Flow using MATLAB”, Journal of Experimental & Applied Mechanics Volume 10, Issue 1, ISSN: 2230-9845 (Online), ISSN: 2321-516X (Print)
  • Prof. (Dr.) Rajendra Kumar Shukla Mr. Manish Mangal (2018), “Numerical Study of a Turbulent Flow Past a Rotating Sphere”, Journal of Aerospace Engineering & Technology (JoAET)Vol 8, Issue No 3,
  • Dr. Abhinav Gupta (2018), “Performance Evaluation of Diesel Engine Fueled with Karanja Biodiesel”, Journal of Alternate Energy Sources and TechnologiesVolume 9, Issue 3, ISSN: 2230-7982 (Online),ISSN: 2321-5186 (Print)
  • Mr.Ankur Dixit (43556), “Analysis of emision on variable compression engine with using biogas as a fuel.”, International Journal of scientific& engneering researchVolume-10, Issue-4, ISSN- 2229-5518
  • Mr. Vijay Kumar Gupta (Mar-Apr 2019), “Automatc Temperature controlled air cooler:Design, assembly and testing”, International Journal of trends in Scientific research & Development (IJTSRDVolume-2, ISSU- 3, e-ISSN-2456-6470
  • Mr. Vijay Kumar Gupta (May-June 2019), “Design of Fin for Various Variables”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, ISSU- 4, ISSN-2456-6470
  • Mr.Saurabh (May-June 2019), “CFD Simulation of air conditioning system of the classroom”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, ISSU- 4, ISSN-2456-6470
  • Mr.Parag Singhal (May-June 2019), “Thermoelectric Air conditioning”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, ISSU- 4, ISSN-2456-6470
  • Mr.Sanjay Kumar (Mar-Apr 2019), “Portable centre pivot irrigation system with advenced control through sensors: A Review”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, ISSU- 4, e-ISSn-2456-6470
  • Mr. Animesh Kumar (2019), “Experimental study of mechanical properties on AL 6063 composite reinforced with silicon carbide”, International Journal of trends & Inovation (IJTSRD)Volume-4, Issue- 4, ISSN: 2456-3315
  • Mr. Animesh Kumar (Mar-Apr 2019), “Reduction in size of var by using different materials in generator”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue-3, E-ISSN-2456-6470
  • Mr.Naveen Kumar (Mar-Apr 2019), “Review on the development of road cleaning & scrap collecting robotic vehicle”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue-3, e-ISSN- 2456-6470
  • Mr.Naveen Kumar (Mar-Apr 2019), “Analysis of energy generation from Exhaust of automobile using peltier (Thermoelectric Generator)”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue-3, e-ISSN- 2456-6470
  • Mr.Naveen Kumar (2018), “Multi-response Optimization of Friction Stir Welding Process Parameters Using Standard Deviation (SD) Based Preference Indexed Value (PIV) Method”, International journal of advanced production and industrial engineering IJAPIEVol 3 (4), 44-48
  • Dr.Rahul Saini (Mar-Apr 2019), “Multi operational machining and controlling with the help of electromagnetic clutch”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue-3, e-ISSN- 2456-6470
  • Ms.Gaganpreet Kaur /Dr.Rahul Saini (May-June 2019), “Design and construction of a shredding Machine for recycling and management of organic waste”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Ms.Gaganpreet Kaur /Dr.Rahul Saini (), “Ardunio Based smart analysing sustem for development stages of wheat Kernel”, ,
    Mr.VIKAS (2019), “An Insight into the Notion of Gameful thinking for learning”, International Journal for scientific Research & DevelopmentVolume-7, Issue- 2, ISSN (online): 2331-0613
  • Mr.VIKAS (2019), “Development of a Heat Actuator Using Liquid-Vapor Phase Change of R134a”, Journal of Thermal Engineering and Applications Volume 6, Issue 1 , ISSN: 2349-8994 (Online)
  • Mr.Manbendra Saha (43586), “Development and optimization of process parameters of microwaved cured polymers based natural fibre (Coir) reinforced composite”, Journal of Emerging Technology and Innovativereaserach (JETIRVolume-6, Issue-5, ISSN-2349-5162
  • Mr.Manbendra Saha (May-June 2019), “Development and optimization of process parameters of microwaved cured polymers based natural fibre (Coir) reinforced composite”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Mr.Chetan Rajoria (Mar-June 2019), “Study of effect of friction on pentograph mechanism”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, issue-3, e-ISSN-2456-6470
  • Mr.Chetan Rajoria (May-June 2019), “Steering controlled Adaptive Head light using sensor”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Mr.Abhishek Pandey (May-June 2019), “Self healing capabilities in polymeric materials: An Introduction to techniques”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Mr.Arun Pratap Singh (May-June 2019), “Smart solar Grass cutter robot”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue- 4, e-ISSN-2456-6470
  • Mr.Arun Pratap Singh (43556), “Operating mechanism and design hydraulic scissor Lift.”, International Research Journal of Engneering and technology (IRJET)Volume-6, Issue-4, e- ISSn-2395-0056 p-ISSN-2395-0072
  • Mr.Navendra Pratap Singh (43556), “Automatic bike side stand”, International Journal of research in engineering, Science and managementVolume-2, Issue-4, ISSN (Online) 2581-5792
  • Mr. Neeraj Kumar Sharma (Mar-Apr 2019), “Multiple products testing on single circular convyor.”, International Journal of trends in Scientific research & Development (IJTSRD)Volume-3, Issue-3,
  • Mr. Rahul Verma (2019), “Vibration analysis of functionally graded materials for cylinder liner used in agricultural engine part”, De Gruyter., 258–266
  • Research Publication 2017-18

    • Dharmendra Singh, Abhishek Sharma, C. Vivekanandhan, Yashvir Singh, Ibrahim Mustefa, Sintayehu Assefa, Seleshi Tilahun,(2018) “EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF FUEL PRESSURE ON SINGLE CYLINDER C.I. ENGINE FUELLED WITH DIFFERENT POLANGA BIODIESEL BLENDS”, Journal of Aerospace Engineering & Technology, volume 8, Issue 2, 58-66 .
    • Shukla, RK (2017), “DESIGN AND TESTING OF A LIQUID – VAPOUR PHASE CHANGE HEAT ACTUATOR”IJRTI – International Journal for Research Trends and Innovation.
    • Singh, D (2017), “CONDITION BASED MONITORING & ;FAULT DIAGNOSTIC OF A MACHINE” journal of experimental & amp; applied mechanics, Volume 9, Issue 2, 2230-9845 (online) 2321-516X (Print)
    • Singh, D, “PVC Water Tank & Slurry Cleaning Machine”
    • Malik, A, Harshana Gupta, Gauarv Chaudhary, Krishna Mohan Signh, Devendra Kumar (2018) “APPLICATION OF INDUSTRIAL ENGINEERING TO INCREASE THE PRODUCTIVITY OF AN E-RICKSHAW FACTORY” International Journal of trend in scientific Research and Development(IJTSRD),,Volume2,Issue, 2456-6470
    • Kaur, G, Gayatri Devi, Abhishek Kumar Mishra, Amarnath Kumar, Akarsh Mishra, Aditya Arahari (2017), “OPTIMIZATION OF LAYOUT AND SCHEDULING IN FMS” International Journal of trend in scientific Research and Development (IJTSRD), Volume- 1, Issue-6, 2456-6934
    • R.S Raman, Himanshu Chauhan, Ankit Negi (2018), “DMAIC APPROACH FOR ROAD WELLBEING: A CASE STUDY” International Conference on Recent Trends in Engineering and Science, Volume-07, 8-11
    • R.S Raman, Yadavalli Basavaraj (2019),“REDUCTION OF DEFECTS IN A CAPACITOR MANUFACTURING PROCESS THROUGH SIX SIGMA CONCEPT: A CASE STUDY” International Journal of six sigma and Competitive Advantages, ISSN 1923-9343(online)ISSN 1923-9335(Print) Volume 9 Issue 2, PP-253-260.
    • Sharma, NK (2018), “AUTOMATIC DRAIN CLEANER” International Journal of Innovative Sc. & Research Technology. ISSN no. 2456-2165, Volume 3, Issue 6.
    • Saha, M, Amber Srivastav, Aman kansal, Devansh Dhar Dubey, Agam Srivastava (2017), “TRI-WHEELER STAIR CLIMBER” International Journal of Trend in Scientific Research and Development (IJTSRD), 2017, ISSN No. 2456-6470, volume 2 Issue 4.
    • Saha, M, Shubham Sachdeva, Shubham Signhal, Navneet Singh, Saurabh (2017), “AUTOMATED STORAGE AND RETRIEVAL SYSTEM” International Journal of Innovation and Research Technology (IJISRT), Volume 3, Issue 5, ISSN No.2456-2165
    • Pandey A Ashish Kumar Anshule Garg, Amit Pathak, Ankesh Pratap, Anoop Pandey (2017), “DESIGN AND ANALYSIS OF WELDING ELECTRODE COATING DIE AND SET UP FOR COATING OF FLUX ON SS308 CORE WIRE” Mat Journal, Volume- 4, Issue 2, PP 1-5
    • Rajoria, C, Deepali Gautam, Harsh Rajput, Abhinav Vats (2017), “DESIGN AND FABRICATION OF A FOOT OPERATED WASHING MACHINE” International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No. 2456-6470, Volume-2 Issue- 4,
    • Goel, AK Vikram Singh (2017), “THERMAL EFFICIENCY OF RETURN FLOW SOLAR AIR HEATER” Journal of Refrigeration, Air Conditioning, Heating and Ventilation, ISSN No. 2394-1952 (online) Volume-4, Issue -3
    • Goel, AK, Vikram Singh (2017),“EFFECTIVE EFFICIENCY OF RETURN FLOW SOLAR AIR HEATER” Journal of Refrigeration, Air Conditioning, Heating and Ventilation, ISSN-2394 (online), Volume-4 Issue-3
    • Kumar, N, Shivam Tyagi, Vaibhav Prajapati, Saurbh Kumar (2017),“THERMAL IMAGING BASED RESEARCH OPERATION USING DRONE” International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN-456-6470, Volume-2, Issue -4
    • Kumar, N, Shivam Tyagi, Vishal Tripathi (2017),“PROTOTYPE OF AUTOMATIC FAN” International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No. 2456-6470, Volume-2 Issue-4
    • Manish Saraswat, Nathi Ram Chauhan (2018), “BIO PHYSIOCHEMICAL ANALYSIS OF ALGAE-GASOLINE AND BUTANOL-GASOLINE BLENDED FUELS” Journal of Energy, Environment & Carbon Credits. ISSN- 2249-862, Volume- 8, Issue-1
    • Manish Saraswat, Nathi Ram Chauhan (2018) “PERFORMANCE AND EMISSION ANALYSIS OF DIFFERENT Ø ALCOHOLIC-BLENDED FUELS IN SPARK-IGNITION ENGINES” Journal of Energy, Environment & Carbon Credits. ISSN 2230-7982 (Online), 2321-5186(Print)
    • Jitendra Mehta, Yogesh Chandr and R. P. Tewari (2018) “THE USE OF DIELECTRIC ELASTOMER ACTUATORS FOR PROSTHETIC, ORTHOTIC AND BIO-ROBOTIC APPLICATIONS” International Conference on Robotics and Smart Manufacturing.
    • A.K. Goel, SN Singh (2017) “THERMAL PERFORMANCE OF SOLAR AIR HEATER USING JET IMPINGEMENT TECHNIQUE WITH LONGITUDINAL FINS” Journal of Scientific and Industrial Research. Volume 76, PP 780-784.
    • Manish Saraswat & Nathi Ram Chauhan, “Assessment Study of Butanol-Gasoline blends in Variable Compression Ratio Spark Ignition Engine” published in Journal of Scientific & Industrial Research, Vol. 77, July 2018. (Impact factor: 0.557).
    • Manish Saraswat & Nathi Ram Chauhan, “Performance Evaluation of Algae Oil -Gasoline Blends in Variable Compression Ratio Spark Ignition Engine” published in Journal of Scientific & Industrial Research, Vol. 77 (12), December 2018. (Impact factor: 0.557).
    • Manish Saraswat & Nathi Ram Chauhan, “Bio-physiochemical analysis of Algae–Gasoline and Butanol-Gasoline blended fuels” published Journal of Energy, Environment & Carbon Credits. 2018; 8(1): 10–16 pp.
    • Manish Saraswat & Nathi Ram Chauhan, “Performance and emission analysis of different alcoholic-blended fuels in spark ignition engines” published in Journal of Energy, Environment & Carbon Credits.
    • Nathi Ram Chauhan, Deeksha Singh, Aditi Monga, Shivangi Sharma, Shreya Devgun, Manish Saraswat, “Mathematical Modeling of Electromagnetic Induction Coil gun for Non-lethal Self-defense Applications”, published in Journal of Experimental & Applied Mechanics ISSN: 2230-9845 (Online), ISSN: 2321-516X (Print) Volume 9, Issue 2.

    International/National Journals 2016-2017

    • Shukla, RK, “Design and Testing Of A Liquid – Vapour Phase Change Heat Actuator” IJRTI – International Journal for Research Trends and Innovation, 2017(Pending)
    • Singh, D, “Condition based Monitoring &Fault Diagnostic of a Machine” Journal of experimental & applied
      mechanics, 2017
    • Singh, D, “PVC Water Tank & Slurry Cleaning Machine”
    • Malik, A, “Application of Industrial Engineering to increase the productivity of an E-Rickshaw factory” International Journal of trend in scientific Research and Development (IJTSRD), 2017
    • Kaur, G, “Optimization of Layout and Scheduling in FMS” International Journal of trend in scientific Research and Development (IJTSRD), 2017
    • Raman, RS, “DMAIC Approach for Road Wellbeing: A case Study” International Conference on Recent Trends in Engineering and Science, 2017
    • Raman, RS, “Reduction of Defects in a Capacitor Manufacturing Process Through Six Sigma Concept: A Case Study” International Journal of six sigma and Competitive Advantages, 2017(Pending)
    • Sharma, NK, “Automatic Drain Cleaner” International Journal of Innovative Sc. &Research Technology, 2017
    • Saha, M, “Tri- Wheeler Stair Climber” International Journal of Trend in Scientific Research and Development (IJTSRD), 2017
    • Saha, M, “Automated Storage and Retrieval System” International Journal of Innovation and Research Technology (IJISRT), 2017
    • Pandey, A, “Design and Analysis of Welding Electrode Coating Die and set up for Coating of Flux on SS308 Core Wire” Mat Journal, 2017
    • Rajoria, C, “Design and Fabrication of a Foot Operated Washing Machine” International Journal of Trend in Scientific Research and Development (IJTSRD), 2017
    • Goel, AK, “Thermal Efficiency of Return Flow Solar Air Heater” Journal of Refrigeration, Air Conditioning, Heating and Ventilation, 2017
    • Goel, AK, “Effective Efficiency of Return Flow Solar Air Heater” Journal of Refrigeration, Air Conditioning, Heating and Ventilation, 2017
    • Kumar, N, “Thermal Imaging Based Research Operation Using Drone” International Journal of Trend in Scientific Research and Development (IJTSRD), 2017
    • Kumar, N, “Prototype of Automatic Fan” International Journal of Trend in Scientific Research and Development (IJTSRD), 2017
    • Eppa Rakesh, Dharmendra singh,  G. Laxhmi Srinivas “Structural Analysis and Prototyping of Truck Under-run Protection Device ” International Journal of Scientific Engineering and Technology.” (IJEST) ISSN 2277-1581, Volume 6, Issue 8, pp 303-306, August 2017
    • Naveen Kumar, Raghib Ahsan “Study of PMEDM Efficiency on EN-31 Steel using Tungsten Powder in Dielectric Fluid” International Journal of Emerging Technologies in Engineering Research (IJETER), Volume 5, Issue 5, May (2017)
    • Kaur, G. “Solar Powered auto Seeding and Sloughing Robot” International Journal of Recent Advancement in Engineering & Research, 3(4), 26,2017
    • Kaur, G, “Design,Analysis and Fabrication of H-Shape Connecting Rod” International Journal of Recent Advancement in Engineering & Research, 3(4), 2017
    • Sanjana Saxena, Pradeep Sharma, “AN APPROACH TO THE ANALYSIS OF HIGHER LINKAGE MECHANISMS AND ITS VALIDATION VIA MATLAB”, 3rd IEEE International Conference on Computational Intellgence and Communication Technology, under TRACK-A : Computational Science and Engineering, 2017.
    • Shukla, R. K., Dixit, G., and Agarwal, A. “An empirical study of Coordination Practices in Supply Chain of Indian Manufacturing Firms, International Journal of Productivity and Quality Management, Vol. 20, No. 3, pp. 291-315, 2017.
    • Shukla, R. K., Dixit, G., and Agarwal, A., “Modeling supply chain coordination for performance improvement using Analytical Network Process (ANP) based approach” International Journal of Business Excellence from Inderscience Publishers ,2017.
    • Panchal D., Chatterjee R., Shukla R.K., Choudhury T. and Tamosaitiene J., Integrated fuzzy AHP-CODAS framework for maintenance decision in urea fertilizer industry, Economic Computation and Economic Cybernetics Studies and Research, Issue 3/2017, Vol. 51, pp 179-196, 2017.
    • Abhishek Kumar Goel& S.N Singh, “PERFORMANCE STUDIES OF A JET PLATE SOLAR AIR HEATER WITH CONTINUOS LONGITUDINAL FINS”. International Journal of Ambient Energy. 1-9, 2017.
    • Abhishek Kumar Goel& S.N Singh, “THERMAL PERFORMANCE OF A JET PLATE SOLAR AIR HEATER USING JET IMPINGEMENT METHOD”, Journal of Scientific & Industrial Research. (12)1-8, 2017

    International/National Journals 2016

    • Dharmendra singh, Aas Mohammad , R. A. Khan, “Joint Resistance method for determination of isomorphism among planar kinematic chains and their derived mechanism ” International Journal of Mechanical Science and Technology.” Springer ISSN 1573—1841, Volume 30, Issue 1, pp 221–227, , January 2016
    • Naveen Kumar, Preetam Ale, Nitesh Kumar, Sunny Sharma “Study of PMEDM Efficiency on HCHCr Steel using Silicon Powder in Dielectric Fluid”International Journal of Emerging Technologies in Engineering Research (IJETER) Volume 4, Issue 5, May (2016)
    • Naveen Kumar, Sukumar Reddy “Side Stand Retrieval System Using Trigger Mechanism”. International Journal of Emerging Technologies in Engineering Research (IJETER), Volume 4, Issue 4, April (2016)
    • Sunny Sharma, Rajesh M, , Vineet Kumar and Naveen Kumar, “ FEA approach of Dental restorative material under Structural and Thermal loads”International Journal of Innovative Science, Engineering & Technology, Vol. 3 Issue 1, January 2016
    • Apoorv Gupta, Aakash Shrivastava, Kushagra Saxena, Anoop Pandey, “OPTIMIZATION OF FRICTION STIR WELDING (FSW) PARAMETERS FOR JOINING ALUMINUM ALLOYS: A REVIEW”, International Journal of Innovative Research in Science and Engineering (IJIRSE), Volume 02, Issue 05, 135-145, 2016.
    • Shubham Jain, Shashank Singh, Saransh Tiwari, Anoop Pandey, “OPTIMIZATION OF PARAMETERS IN WELDING OF PLASTICS USING FRICTION WELDING”, International Journal of Advanced Technology in Engineering and Science (IJATES), Volume 04, Issue 05, 441-447, 2016.
    • Shivam Sharma, Anoop Pandey, Payal Damle, “BENCHMARKING TECHNIQUES – A REVIEW AND EXPLORING SUITABLE TECHNIQUES TO BENCHMARK PERFORMANCE IN ACADEMIA”, International Journal of Research in Science and Engineering (IJIRSE), Volume 02, Issue 05, 382-393, 2016.
    • A Pandey, S Garg, M S Rautela, M Choudhary, I Kakkar, “REQUIREMENT OF OPTIMIZATION OF MACHINING PARAMETER FOR IMPROVING THE SURFACE FINISH OF MATERIALS – A REVIEW” International Journal Of Advance Research In Science And Engineering (IJARSE), Vol. No. 4, Special Issue (01), 270-275, 2015.
    • Kumar Manoj, “THE USE OF TAGUCHI METHOD IN DETERMINE THE OPTIMUM HSS CUTTING TOOL PARAMETERS”, VISION &QUEST, Vol. No. 6 No.1, 27-31, ISSN 0975-8410. , 2016.
    • Sanjana Saxena, Pradeep Sharma,” TO ANALYSE THE CURVATURE PROPERTIES OF A FOUR-BAR MECHANISM VIA MATHEMATICAL MODELLING TECHNIQUES”, International Journal of Recent Trends in Engineering and Research, (IJRTER), Volume 02, Issue 02, [ISSN:2455-1457], PP 62-71, 2016.
    • Shukla, R. K., Dixit, G., and Agarwal, A., “Modelling Supply Chain Coordination in Fuzzy Environment” International Journal of Business Performance and Supply Chain Modelling (IJBPSCM), Volume 8, issue 2, pages 130-156, 2016
    • Shukla, R. K., Dixit, G., and Agarwal, A, “Coordination Practices in Supply Chain Management: An Empirical Study of Indian Manufacturing Firms”, Journal of Management Research, Vol. 16, No.1, pp.44-54, 2016.
    • Bansal P, Chattopadhayay AK, Agrawal VP, “Steady State Performance Characteristics of Micropolar Lubricated Hydrodynamic Journal Bearings with Flexible Liner.” Journal of Institutions of Engineers (India) – Series C, 97(2), 195-207,2016.
    • Malik, A., Mohapatra, S. K. ,“Power generation using cotton stalk-derived producer gas in diesel engines.” Energy Sources, Part A: Recovery, Utilization, And Environmental Effects 38(19), 2816-2822, 2016.
    • TanviVerma,ShivamVarma,PoonamPushpanjali,PramodKumar,Abhishek Pandey,“Design and Fabrication of Power Shovel”, International Journal of Emerging Technologies and Innovative Research, Volume 3, Issue 10, , ISSN2349-5162. October 2016
    • K Guru, T Sharma, KK Shukla and SB Mishra “Effect of Interface on the Elastic Modulus of CNT Nanocomposites.” Journal of Nanomechanics and Micromechanics, ASCE, 04016004. (ISSN No: 2153-5434) (DOI:10.1061/(ASCE)NM.2153-5477.0000109) (IF: 1.6), 2016.

    International/National Journals 2015

    • Dharmendra singh, Aas Mohammad , R. A. Khan , “Joint Resistance method for determination of isomorphism among planar kinematic chains and their derived mechanism “International Journal of Mechanism and Robotic System”. Inderscinec Publishers ISSN: 2047-7252, vol-2 Issue-2, pp 182-194, April 2015
    • Ajay Batish, Anirban Bhattacharya, Naveen Kumar “Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM”. Particulate Science and Technology: An International Journal, Volume 33, Issue 2:150-158, 2015
    • Malik, A., Bhardwaj, S., Kaur, G., & Singh, N. P. “Use of Agri-waste for the Development of Sustainable Energy Resources”, 4(5), 1487–1491, 2015.
    • Malik, A., Singh, N. P., Kumar, P., & Bansal, D. “ECONOMIC ANALYSIS OF PRODUCING BIOGAS FROM RURAL WASTE-A CASE STUDY”, 144601, 553–557,2015
    • M S Rautela, A Pandey, S Garg, P Damle, “CASE STUDY: MAKING AND MONITORING OF CRITICAL PATH IN SHOE PRODUCTION PLANNING”, Journal of Business Management & Social Sciences Research (JBM&SSR), Volume 4, No.3, 251-256, 2015.
    • Manish Saraswat et. al., “EFFECT OF COMPRESSION RATIO ON PERFORMANCE AND EMISSIONS OF DIESEL ON A SINGLE CYLINDER FOUR STROKE VCR ENGINE”, International Journal of Emerging Technology and Advanced Engineering, (ISSN 2250-2459 (Online), Volume 5, Special Issue 1, April 2015.
    • Manish Saraswat et. al., “ASSESSMENT OF DIFFERENT ALTERNATIVE FUELS FOR INTERNAL COMBUSTION ENGINE: A REVIEW”, International Journal of Engineering Research & Management Technology, Volume 2, Issue-3 ISSN: 2348-4039, May- 2015.
    • Manish Saraswat et. al., “POTENTIAL OF NIGHT SOIL AS A SUBSTITUTE OF COAL IN POWER GENERATION AND UTILIZATION OF MOBILE TOILETS WASTE”, International Journal of Engineering Research & Management Technology, Volume 2, Issue-4039-3, ISSN: 2348, May- 2015.
    • Saxena*, Prof. Mohd. Parvez, Saurabh, “OPTIMIZATION OF MIG WELDING PARAMETERS ON TENSILE STRENGTH OFALUMINUM ALLOY BY TAGUCHI APPROACH”, International Journal Of Engineering Sciences & Research Technology,Volume4, Issue6, 2015.
    • Maurya, Saurabh, “WASTE HEAT RECOVERY FROM A DOMESTIC REFRIGERATOR BY UTILIZING CONDENSER HEAT AS A HEATING MEDIUM”, VSRD International Journal of Mechanical, Civil, Automobile and Production Engineering, Vol. V Issue II February 2015
    • Shukla, R. K., Dixit, G., and Agarwal, A., “Supply Chain Coordination: A Theoretical Framework” Industrial Engineering Journal, Volume VII and Issue No. 10 pp 23-26, 2015.
    • Sikarwar, B. S., Shukla, R. K., & Sharma, S. K., “Experimental study for investigating the mechanism of heat transfer near the critical heat flux in nucleate pool boiling”, International Journal of Engineering-Transactions B: Applications, 28(8), 1241-1250, 2015.
    • Bansal P, Chattopadhayay AK, Agrawal VP, “Linear stability analysis of hydrodynamic journal bearings with a flexible liner and micropolar lubrication.” Tribology Transaction, 58, 316-326. SCI Indexed Impact Factor 1.18, 2015.
    • Malik, A., Singh, N.P., Bhardwaj, S., Kaur, G., “Use of Agri-waste for the Development of Sustainable Energy Resources.” IJERT 4 (5), 1487-1491,2015.
    • Brij BhooshanYadav, Abhishek Kumar Goel, Anil Kumar, “EFFECT ON COOLING SYSTEM IN RANQUE REFRIGERATION”, IJRREST ( ISSN: 22786643) 5, (1) 36-43, 2015.
    • Praveen Kumar, Bikas Prasad, Anil Kumar, AbhishekGoel, “INVESTIGATION OF DIFFERENT SPECIMEN IN FOUNDRY SHOP BY CASTING PROCESS”, IJRREST ( ISSN:22786643) 5, (1) 48-51, 2015
    • Ujjawal Kumar, Bikas Prasad, Anil Kumar, AbhishekGoel,“ANALYSIS AND DETERMINATION OF ENERGY AND EFFECTIVENESS BASED ON LOW CARBON MANUFACTURING PROCESS”, IJRREST ( ISSN: 22786643) 5, (1) 59-63, 2015.
    • Rahul Kumar, BikasPrasad, Anil Kumar, AbhishekGoel, “EXPERIMENTAL ANALYSIS OF COMPOSITE MATERIAL SPECIMEN”,IJOETR (ISSN: 24556130) 1(7) 50- 59, 2015.
    • Sandeep Garg, Ravi Shankar Raman, Atin Kumar, SiddharthGarkhail, Nawanit Singh Yadav,“DESIGN ANALYSIS OF THE ROLL CAGE FOR THREE WHEELED HUMAN POWERED HYBRID 20. ELECTRIC VEHICLE”, International Journal of Emerging Technology and Advanced Engineering, Volume 5, Issue 5, 2015.
    • Prashant Vashishtha, Ravi Shankar Raman, “TO REDUCE THE REJECTION LEVEL OF CHASSIS 260L BY USING SIX SIGMA TOOLS”, International Journal of Emerging Technology and Advanced Engineering, Volume 5, Page 220-228, ISSN 2250-2459, 2015.
    • RichaSaxena, Abhishek Pandey, “Analysis of process parameters of CNC lathe turner by Response Surface Methodology”, ELK Asia Pacific Journals, ARIMPIE, Special Issue, ISBN: 978-81-930411-4-7, 323-327. , 2015
    • Anil Kumar, Abhishek Pandey, “Study of Fatigue life calculation of steel under various loading conditions”, ELK Asia Pacific Journals, ARIMPIE, Special Issue, ISBN: 978-81-930411-4-7, 46-49, 2015.
    • K Guru, SB Mishra, KK Shukla “Effects of temperature and Functionalization on the Interfacial Properties of CNT Reinforced Nanocomposites.” Applied Surface Science 349 59–65. (ISSN: 0169-4332) (http://dx.doi.org/10.1016/j.apsusc.2015.04.196) (IF: 3.15) ,2015.

    International/National Journals 2014

    • Dharmendra singh, Aas Mohammad , R. A. Khan,“Resistance distance method for determination of isomorphism among planar kinematic chains and their derived mechanism “International Journal of Mechanical Engg and Technology.” (IJMET), ISSN 0976-6359 Volume 5, Issue 3, pp.122-129., 2014
    • Ankur Dixit .Et.al “Biodiesel fuel emissions and performance on Industrial and Automobiles Applications” in International Journal of Modern Engineering Research,. (2014)
    • Aggarwal Lucky, Kaur Gaganpreet and Singh, N.P “An Introduction to Laser Igniters : Revolution in Internal Combustion”. 5(1), 107–109, 2014.
    • Anoop Pandey, Sandeep Garg, Payal Damle, Mahindra Rautela, Mohit Choudhary, Harshit Bhalla, “AN EXPERIMENTAL INVESTIGATION TO OPTIMIZE THE PROCESS PARAMETERS OF SURFACE FINISH IN TURNING AISI 202 STAINLESS STEEL USING TAGUCHI APPROACH”, International Journal of Computational Engineering Research, Vol 4, Issue 12, 41-45, 2014.
    • Anoop Pandey, Sandeep Garg, Payal Damle, Mahindra Rautela, Mohit Choudhary, Harshit Bhalla, “AN EXPERIMENTAL INVESTIGATION TO OPTIMIZE THE SURFACE FINISH FOR TURNING AISI 202 USING S/N RATIO AND ANOVA TECHNIQUE”, International Journal of Computational Engineering Research, Vol, 04,Issue, 12, 41-45, 2014.
    • Maurya, Saurabh, “WASTE HEAT RECOVERY: AN ANALYTICAL STUDY OF COMBINED EJECTOR AND VAPOUR COMPRESSION REFRIGERATION SYSTEM”, International Journal Of Engineering Sciences & Research Technology,3 (3),(1422-1425), 2014.
    • Maurya, Saurabh, Suhail A. Siddiqui(2014), “A COOLING SYSTEM FOR AN AUTOMOBILE BASED ON VAPOUR ABSORPTION REFRIGERATION CYCLE USING WASTE HEAT OF AN ENGINE”, International Journal of Engineering Research and Applications, Vol. 4, Issue 3(Version 1), March 2014, pp.441-444, 2014
    • Sanjay Kumar, Krishna Kumar Karothiya, Raj Kumar, “RENEWABLE ENERGY GENERATION AND CONVERSION TO MEET INDIA’S FUTURISTIC NEED”, International conference on energy generation and conservation for meeting India’s futuristic needs, 13,67-70, 2014.
    • Krishna Kumar Karothiya, Amit Kumar Tripathi, Sanjay Kumar, S. Singh, “FEASIBILITY ANALYSIS OF ROOFTOP WIND TURBINE IN INDIA”, International conference on energy generation and conservation for meeting India’s futuristic needs, 8, 46-48, 2014.
    • Apurva Mishra, Srishti Singh, Vijay kr. Gupta, Pradeep Sharma,” HEAT TRANSFER OVER A FLAT PLATE IN LAMINAR FLOW BY USING COMPUTATIONAL FLUID DYNAMICS” ICAST 2014 conference held at Sraswati College of Engineering , Navi Mumbai, Khargar under TRACK-1, 2014.
    • Shukla, R. K., Dixit, G., and Agarwal, A. “Integration of Fuzzy AHP and Fuzzy TOPSIS for Evaluating Trading Partners for Supply Chain Coordination”, Production and Manufacturing Research , Volume 2, Issue 1, Pages 415-437.[Taylor and Francis], 2014.
    • Mangal, M., Dr. Agarwal, P.K., Prof. Behl, J.S., “DRAG REDUCTION OF A SQUARE CYLINDER WITH UPSTREAM ROD ARRANGEMENT AND ITS COMPUTATIONAL ANALYSIS”. National Conference (RAMCE-2014), AKGEC, Ghaziabad, 2014.
    • Kushwaha, Mayank, &Saini, P.K.,“AN ANALYTICAL APPROACH TO REDUCE THE STRESS CONCENTRATION AROUND A CIRCULAR HOLE IN A FUNCTIONALLY GRADED MATERIAL PLATE UNDER AXIAL LOAD”,Applied Mechanics and Materials, Vols. 592-594,pp 985-989, 2014.
    • Abhishek Kumar Goel, S.N Singh,“EFFECT OF GEOMETRICAL PARAMETERS ON THERMAL BEHAVIOR OF A JET PLATE SOLAR AIR HEATER”, International Journal of Energy &Technology. 6 18) 2014, 1-8, 2014
    • Aggarwal.P.K ,Saha Manabendra “MODELING AND ANALYSIS OF CONNECTING ROD”national conference FME-2014

    International/National Journals 2013

    • Dharmendra singh, Aas Mohammad , R. A. Khan,“Detection of Isomorphism among Kinematic Chains by Assigning type number of different joints” International Journal of Applied Engineering research (IJASER) Vol-2 Issue 3, p265-271. , 2013
    • Ajay Batish, Anirban Bhattacharya, Naveen Kumar “Surface Characterization and Material Migration during Surface Modification of Die Steels with Silicon, Graphite and Tungsten Powder in EDM Process”, Journal of Mechanical Science and Technology, 27(1) 133-140, 2013: (Impact Factor = 0.838).
    • Sandep Garg, Ish Kakkar, Anoop Pandey, Mayank Gupta and Nand Kishor, “EFFECT OF DIFFERENT COATING COMPOSITIONS’ RUTILE TYPE WELDING ELECTRODE ON UNDERCUT DEFECT IN MANUAL ARC WELDING”, International Journal of Mechanical Engineering and Research, Volume 3, Number 4, 381-388,2013.
    • I Kakkar, A Pandey, M. Gupta, H. Jaiswal, “ANSI/AWS E308-16 RUTILE ELECTRODE : THE EFFECT OF ENDOTHERMIC MATERIALS ON UNDERCUT DEFECT ON LOW CARBON STAINLESS STEEL”, Journal of Institution of Engineers (India): Series C, Volume 94, Issue 4, 293-297, 2013.
    • Manish Saraswat et. al., “SYNTHESIS OF AL-MG-ZN ALLOYS AND STUDY OF THEIR MECHANICAL PROPERTIES”. International conference on manufacturing excellence –MANFEX-2013, Amity University, 2013.
    • Shukla, R. K., Dixit, G., and Agarwal, A. “Modelling Supply Chain Coordination: An Application of Analytic Hierarchy Process under Fuzzy Environment” International Journal of Supply Chain Management, 2(4), 32-41,2013.
    • Shukla, R. K., Dixit, G., and Agarwal, A. “Supply Chain Coordination Competency and Firm Performance: An Empirical Study” International Journal of Supply Chain Management, 2(4), 64-70, 2013.
    • Malik, A., Mohapatra, S. K. “Biomass-based gasifiers for internal combustion (IC) engines—A review”. Sadhana 38 (3), 461-476,2013.
    • Mangal, M., Gupta, V.K., Bhardwaj, P. Singh, Y., “MIXED CONVECTION ALONG A VERTICAL PLATE WITH UNIFORM WALL TEMPERATURE”,2nd International Conference on Role of Technology in Nation Building (ICRTNB), SITE, Meerut, 2013.
    • Ravi Shankar Raman and Sandeep Garg ,”DESIGN ANALYSIS OF THE ROLL CAGE FOR ALL – TERRAIN VEHICLE”, International Journal of Research in Engineering & Technology, Vol 03, Issue 09, Page 333-338, 2013.
  • Brochure Form

    We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    Brochure