Workshops and trainings - ABES ENGINEERING COLLEGE | Rank 1 in AKTU

Mechanical Engineering

Workshops

  • An International workshop was organized on Thermal Engineering in May 2018 by Department of Mechanical Engineering. It was organized by Thermal research group. The workshop was conducted by Dr. Andrey V. Kuzmin(Associate (Lead) Editor – International Journal of Energy for a Clean Environment) from Ukraine. All the faculty members under thermal group and interested students attended the workshop.

     


    Figure 3: International Workshop on Thermal Engineering

     


    Figure 4: International Workshop on Thermal Engineering

     


    Figure 5: International Workshop on Thermal Engineering

     

  • On March 27, 2018 department of Mechanical Engineering organized a workshop on the topic “Tips & Techniques to publish International research publication” for all the attendee of ABES-2018. In this workshop Prof. Md. Mamun Habib (BRAC University, Dhaka,Bangladesh) enlightened the participants about writing research papers, book chapters etc.

     


    Figure 6: International Workshop on Tips & Techniques to publish International research publication


    Figure 7: International Workshop on Tips & Techniques to publish International Research Publication

     

  • Mr.ManabendraSaha (Sr. Asst. Professor) attended workshop on Composite Material in Engineering Application: Design and Manufacturing Prospective at IIT Mandi in Jan 2018
  • Mr.Manish Mangal (Asst. Professor) attended QIP Short Term Course On Computational Method On Fluid Mechanics And Heat Transfer at IIT ROORKEE in 19-23 Feb 2018
  • Prof. (Dr.) Yogesh Chandra attended 2 days workshop on Power Plant Engg by NPTI, New Delhi for Final year students.
  • Prof. (Dr.) Ashish Malik attended two days workshop on Outcome Based Education at AKTU, Noida Campus.
  • Dr. Kishore K Guru and Ms. Monika Chauhanaattended an FDP on “Manufacturing world and its future” at JSS Academy of Technical Education, Noida from Apr 23-28, 2018.
  • Ms. Monika Chauhan attended 1- week short term course in “CFD – Multi-Phase flow in Miniature applications” at IIT Roorkee, June, 2018.
  • One week faculty development program on “Reconfigurable Manufacturing System: Research Potential” was organized July 2 – July 6, 2018 sponsored by Dr. APJ AKTU under TEQIP-III scheme. This FDP was organized by head of department Prof. (Dr.) Rajendra Kumar Shukla (HoD, ME), Dr. Kishore Kumar Guru (Associate Professor) and Ms. Gaganpreet Kaur(Associate Professor).
  • One week faculty development program on “Outcome Based Education: Teaching, Learning & Evaluation” was organized June 18 – June 22, 2018 sponsored by Dr. APJ AKTU under TEQIP-III scheme. This FDP was organized by head of department Prof. (Dr.) Rajendra Kumar Shukla (HoD, ME) and Prof. (Dr.) Ashish Malik.
  • One week faculty development program on “Computational Fluid Dynamics” was organized June 4 – June 8, 2018 sponsored by Dr. APJ AKTU under TEQIP-III scheme. This FDP was organized by head of department Prof. (Dr.) Rajendra Kumar Shukla (HoD, ME) and Prof. (Dr.) Dharmendra Singh (A-HoD, ME).
  • Prof. (Dr.) Yogesh Chandra Attended 8 days workshop on “Human Values and Professional Ethics”, Level -1 from 18-25 May, 2018 in IITK
  • An International workshop was organised on Thermal Engineering in May 2018 by Department of Mechanical Engineering, Thermal Group
  • An International Workshop was organized on Tips & Techniques to Publish International Research Publications in March 2018 by Department of Mechanical Engineering

Dr. R.K Shukla

  • Attended and organized five days International workshop on “Thermal Engineering” at ABES, EC Ghaziabad in November 2017.

Mr. Manish Mangal

  • Attended a three days workshop on solid works modeling and simulation at MTU, Noida in September 2013.
  • Organized and participated in five days National workshop on “Renewable Energy and its Applications” at ABES EC Ghaziabad in March 2014.
  • Attended an ISTE workshop for five days on Fluid Mechanics, under NMEICT MHRD, held at MGM, Noida in May 2014.
  • Organized and participated in five days National workshop on “Innovations in Design and Manufacturing (IDaM)” at ABES EC Ghaziabad in March 2015.
  • Organized and participated in five days International workshop on “Thermal Engineering” at ABES EC Ghaziabad in November 2017.

Dr. Kishore Guru

  • Attended GIAN Course on Emerging Trends in Bio-Robotics for Development of Prosthetic and Orthotic Devices held at MNNIT Allahabad from Dec 19-30 2016.
  • Participated in Pravartana-2013: TEQIP Workshop on Applied Mechanics held at IIT, Kanpur from 5-7 Oct 2013.
  • Participated as a DST sponsored candidate in Symposium on Molecular Simulation held at IIT, Kanpur from 27-30 Nov 2012.

Mr. Subash Chand Pal

  • Organised an International Workshop on “Thermal Engineering” at ABES Engineering College Ghaziabad from 06/11/2017 to 10/11/2017.

Mr. Parag Singhal

  • Organised an International Workshop on “Thermal Engineering” at ABES Engineering College Ghaziabad from 06/11/2017 to 10/11/2017.
  • Attended a workshop on “Innovations in Design and Manufacturing” at ABES Engineering College Ghaziabad from 10/04/2015 to 11/04/2015.

Mr. Mayank Kushwaha

  • Attended a workshop on “Innovations in Design and Manufacturing” at ABES Engineering College Ghaziabad from 10/04/2015 to 11/04/2015.
  • Attended a faculty workshop in Mechanical Engineering at Skyline Institute of Engineering & Technology from 15/11/2014 to 16/11/2014.

Mr.Saurabh Awasthi

  • Participate in Workshop on “Mechanical Engineering Design” Conducted on Nov 15-16, 2014  at SKYLINE Institute ,Greater Noida.
  • Attended and Organized National Workshop on “Renewable Energy & its Applications” From 20-23 Feb 2014.
  • Organized and participated in five days National workshop on “Innovations in Design and Manufacturing (IDaM)” at ABES EC Ghaziabad in March 2015.

Mr. Navendra Pratap Singh

  • Attended in national workshop on NBA from 27-29 November 2014 in JSS ATE , Noida
  • Attended training on “ANSYS Structural” from 22-25 May 2014 in ABESEC, Ghaziabad.
  • Attended and Organized National Workshop on “Renewable Energy & its Applications” from 20-23 Feb 2014.
  • Attended and organized national workshop on “Innovation in Design and Manufacturing” April 10 -11, 2015 in ABESEC, Ghaziabad.
  • Attended Entrepreneurship Faculty educator Program For orientation Course from 10 -14 August 2017 in Noida

Gaganpreet Kaur

  • Attended workshop on “Machine Design” on 20 th November 2010Attended National workshop on “Advances in Welding Technology” on 23rd & 24th March 2012 in ABESEC, Ghaziabad.
  • Attended National workshop on “Emerging Trends in Mechanical Engineering” on 27 – 28 July 2012 in AKGEC, Ghaziabad.
  • Attended and organized workshop on “Basic Robotics and introduction of autonomous Robotics” on 16’th & 17’th March 2013 in ABESEC, Ghaziabad.
  • Attended International conference on “Manufacturing Excellence” on 30th & 31st May 2013 in Amity University, Noida
  • Attended and Organized National Workshop on “Renewable Energy & its Applications” From 20-23 Feb 2014.
  • Organized and participated in five days National workshop on “Innovations in Design and Manufacturing (IDaM)” at ABES EC Ghaziabad in March 2015.

Mr. Vaibhav Sharma

  • Attended a one day workshop on “Clean Energy Technology” at KIET Ghaziabad in November 2011.
  • Attended a two days workshop on “Rural Development and Management through IT” at JPIT Meerut in August 2012.
  • Attended a two days workshop on “Recent Developments In Optimization Techniques for solving Industrial problems” at JPIT Meerut in August 2012.

Mr.Manish Saraswat

  • Organised
    • Organized a four days workshop on “Dis-assembly of a car, METAWING. NOIDA” at ABES EC Ghaziabad in November 2013.
    • Organized a five days National workshop on “Renewable Energy and its Applications” at ABES EC Ghaziabad in February 2014.
    • Organized a training workshop on “SMC Pneumatics” at ABES EC Ghaziabad in July 2017.
  • Attended
    • Attended a two days workshop on “Recent Advances in Chemical and Env. Sciences” at ABES EC Ghaziabad in May 2014.
    • Attended a training workshop on “SMC Pneumatics” at ABES EC Ghaziabad in July 2017.

Dr. Ashish Malik

  • Organised
    • Organizing Secretary of a AICTE Sponsored workshop on Advanced Welding Technology in March 2012.
    • Organizing Secretary of a MNRE Sponsored workshop on Renewable energy & its applications in February 2016.
    • Organizing Secretary of a Adriotec Sponsored workshop on Innovations in Design and Manufacturing in November 2017.
    • Faculty Coordinator of a Four Days workshop on Disassembly of commercial car in November 2013.
  • Attended
    • AICTE Sponsored workshop on “Advanced Welding Technology” organized by ABES EC , Ghaziabad in March 2012.
    • MNRE Sponsored workshop on “Renewable energy & its applications” organized by ABES EC , Ghaziabad in February 2016.
    • Adriotec Sponsored workshop on “Innovations in Design and Manufacturing” organized by ABES EC , Ghaziabad in November 2015.
    • MTU Sponsored National Workshop on “Technical Writing” organized by ABES EC , Ghaziabad in November 2013.

Mr. Chetan Rajoria

  • Organised
    • Adriotec Sponsored workshop on “Innovations in Design and Manufacturing” organized by ABES EC , Ghaziabad in April 2015.
  • Attended
    • AICTE Sponsored workshop on “Advanced Welding Technology” organized by ABES EC , Ghaziabad in March 2012.
    • Adriotec Sponsored workshop on “Innovations in Design and Manufacturing” organized by ABES EC , Ghaziabad in April 2015.
    • MNRE Sponsored workshop on “Renewable energy & its applications” organized by ABES EC , Ghaziabad in February 2016.

Mr. Sharad Bhardwaj

  • Attended
    • AICTE Sponsored workshop on “Advanced Welding Technology” organized by ABES EC , Ghaziabad in March 2012.
    • Adriotec Sponsored workshop on “Innovations in Design and Manufacturing” organized by ABES EC , Ghaziabad in April 2015.
    • MNRE Sponsored workshop on “Renewable energy & its applications” organized by ABES EC , Ghaziabad in February 2016.

Mr. Manabendra Saha

  • Attended
    • Adriotec Sponsored workshop on “Innovations in Design and Manufacturing” organized by ABES EC , Ghaziabad in April 2015.
    • MNRE Sponsored workshop on “Renewable energy & its applications” organized by ABES EC , Ghaziabad in February 2016.

Trainings

Dr. R.K Shukla

  • Attended Training cum workshop on Computational Fluid Dynamics organized at Amity University, Uttar Pradesh
  • Attended training on Simulation Software on Turning and Milling in April, 2008 at JSS Academy of Technical Education, Noida.
  • Attended ISTE Short Term Training Programme on “Recent Development in Nano and Micro-Manufacturing” April 15-19, 2013 at School of Engineering and Technology IGNOU Maidan Garhi, New Delhi-110068.
Brochure Form

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

X
Brochure