Journal:

---

1. Vyomesh Buch, Ankit D. Oza, Sandeep, Manoj Kumar , Manish Gupta & Shuchi Midha, (2024); "Effect of vibration casting on the properties and microstructure of aluminium alloy castings", INNOVATION AND EMERGING TECHNOLOGIES, WORLD SCIENTIFIC PUBL CO PTE LTD, Vol. 10( ), pp: 23400101- 23400107, ISSN 2737-5994 doi:10.1142/S2737599423400108

2. Ronakkumar Shah, Vishal Chaudhary, Manoj Kumar, Feroz Shaik, Digvijay Kulshrestha, Chandrakant Sonawane, Purva Saxena, Ankit Oza, Abhinav Kumar, (2024); "Design and performance analysis of hydrogen-fueled micro combustion chamber with focus on back pressure minimization", Applied Chemical Engineering, EnPress Publisher, LLC, Vol. 7( 1), pp: 1- 12, ISSN 2578-2010 https://doi.org/10.24294/ace.v7i1.3364

3. Usha Pawar, Shivaji G. Chavan, Kiran Suresh Bhole, Mansing Rathod, Dipali Bhole, Ankit D. Oza, Manoj Kumar, Manish Gupta, Satbir S. Sehgal & Manoj Kumar, (2023); "Modeling and analysis of multi-functional selfhealing material using Runge-Kutta Method for investigation of aircraft wing structure", ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, Taylor & Francis, Vol. 1( ), pp: 1- 18, ISSN 2374-068X 10.1080/2374068X.2023.2264577

4. Manisha Makwana, Ajay M Patel, Ankit D. Oza, Manoj Kumar, Abhishek Kumar & Abhishek Joshi, (2023); "Influence on dynamic behaviour of single layer graphene by Stone wales and pinhole defects", ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, Taylor & Francis, Vol. 1( ), pp: 1- 13, ISSN 2374-068X https://doi.org/10.1080/2374068X.2023.2192126

5. Abhishek Pandey, Atul Kumar Sharma, Dharmendra Kumar Shukla and Kailash Narayan Pandey, (2023); "Effect of Self-Healing by Dicyclopentadiene Microcapsules on Tensile and Fatigue Properties of Epoxy Composites", Materials, MDPI, Vol. 16( 14), pp: 5191- 5210, ISSN 1996-1944 https://doi.org/10.3390/ma16145191

6. Manoj Nikam , Hamad A. Al-Lohedan , Faruq Mohammad , Surekha Khetree, Vinayak Patil, Girish Lonare, Firdos Jahan Khan, Govind Jagatap, Jayant P. Giri, Ankit D. Oza, Manoj Kumar, Rajkumar B. Chadge and Ahmed A. Soleiman, (2023); "Optimization of Machining Parameters for Enhanced Performance of Glass-Fibre-Reinforced Plastic (GFRP) Composites Using Design of Experiments", Sustainability, MDPI, Vol. 15( 16), pp: 1- 16, ISSN 2071-1050 https://doi.org/10.3390/su151612372

7. Ashok Kumar Sharma, Vishal Singh, Ashish Goyal, Ankit D. Oza, Kiran S. Bhole, Manoj Kumar, (2023); "Experimental analysis of Inconel 625 alloy to enhance the dimensional accuracy with vibration assisted micro-EDM", International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Nature, Vol. 1( ), pp: 1- 15, ISSN 1955-2513 https://doi.org/10.1007/s12008-023-01228-5

8. Naman Jain, Pragya Sharma, Akarsh Verma and Juhi Gupta , (2023); "Enhancement of thermo-mechanical, creep-recovery, and anti-microbial properties in PVA-based biodegradable films through cross-linking with oxalic acid: implications for packaging application", Biomass Conversion and Biorefinery, Springer, Vol. -( ), pp: 1- 10, ISSN 2190-6823 https://doi.org/10.1007/s13399-023-04748-y

9. G. Sharma, D K Dwivedi and P. Sharma, (2023); "Study on dislocation density, microstructure, and mechanical properties of P92 steel for different heat treatment conditions", Materials Science Engineering & Technology, Wiley , Vol. 54( ), pp: 1148- 1196, ISSN 1521-4052 https://doi.org/10.1002/mawe.202100023

10. Mahendra U Gaikwad, Pradeep Gaikwad, Krishnamoorthy A, Vijaykumar S Jatti, Nitin Ambhore, Ankit D. Oza, Manoj Kumar, Manish Gupta & Unnati Joshi, (2023); "Fatigue analysis of electro discharge machined Nitinol 60", INNOVATION AND EMERGING TECHNOLOGIES, WORLD SCIENTIFIC PUBL CO PTE LTD, Vol. 10( 1), pp: 1- 8, ISSN 2737-5994 doi:10.1142/S2737599423400091

11. Yashesh Darji, Dilipkumar Patel, Dhaval Patel, R. Ramesh, Ankit D. Oza, Kiran S. Bhole, Sachin M. Shinde, Manoj Kumar, (2023); "Experimentation with the EDM parameter through a full factorial technique and optimization using regression analysis with carbon nanotubes", International Journal on Interactive Design and Manufacturing, Springer Nature, Vol. 1( ), pp: 1- 14, ISSN 1955-2513 https://doi.org/10.1007/s12008-023-01263-2

12. G. R. Arpitha, Naman Jain, Akarsh Verma, (2023); "Banana biofiber and glass fiber reinforced hybrid composite for lightweight structural applications: mechanical, thermal, and microstructural characterization", Biomass Conversion and Biorefinery, Springer, Vol. 15( ), pp: 1- 11, ISSN 2190-6815 https://doi.org/10.1007/s13399-023-04300-y

13. Akash D. Pandya 1, Ajay M. Patel 1, Bhavesh R. Hindocha 2, Manoj Kumar 3, Ankit D. Oza 4,*, Kiran S. Bhole 5, Manoj Kumar 6 & Manish Gupta 7, (2023); "Using automation and machine learning to maximize tool use in turning centers for better surface finish", INNOVATION AND EMERGING TECHNOLOGIES, WORLD SCIENTIFIC PUBL CO PTE LTD, Vol. 10( ), pp: 1- 13, ISSN 2737-5994 doi:10.1142/S2737599423400030

14. Rahul Verma, Mohammad Sikandar Azam, Shiv Ranjan Kumar, (2022); "Performance evaluation of glass ionomer and alumina-silica nanoparticle reinforced dental composite using preference selection index", Polymer Composites, John Wiley and Sons Inc., Vol. 43( 6), pp: 3745- 3752, ISSN 1548-0569 https://doi.org/10.1002/pc.26652

15. G. R. Arpitha, Naman Jain, Akarsh Verma, M. Madhusudhan, (2022); "Corncob bio?waste and boron nitride particles reinforced epoxy?based composites for lightweight applications: fabrication and characterization", Biomass Conversion and Biorefinery, Springer, Vol. 13( ), pp: 1- 8, ISSN 2190-6815 https://doi.org/10.1007/s13399-022-03717-1

16. Asim Kumar Das1 · Ravi Kant Singh1 · Manideep Roy1 · Amit Kumar2 · Subhas Chandra Rana1 · Alok kumar Ansu3 · Ashish Goyal3 · Ankit D. Oza4 · Manoj Kumar5 · Anita Gehlot6, (2022); "Optimum design of S-shaped diffuser by studying the effect of inlet velocity, turning angle and area ratio", International Journal on Interactive Design and Manufacturing, Springer Nature, Vol. 1( ), pp: 1- 13, ISSN 1955-2513 https://doi.org/10.1007/s12008-022-01132-4

17. Nidhi Bansal Garg, Atul Garg, Mohit Bansal, (2022); "Effect of Cold Work, Ageing on Hardness and Ultimate Tensile Strength of Microalloyed Steel", Key Engineering Materials, scientific.net, Vol. 933( ), pp: 116- 123, ISSN 1662-9795 https://doi.org/10.4028/p-r2n2g8

18. Mukesh Kumar, Ravi Kant Gupta, Anand Pandey, Ashish Goyal, Ankit D. Oza, Manoj Kumar, Rajesh Deorari, Deepak Kumar, (2022); "Development of tool electrode by powder metallurgy technique and analysis of tool wear rate by design of experiment methodology", International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Nature, Vol. 1( ), pp: 1- 12, ISSN 1955-2513 https://doi.org/10.1007/s12008-022-01128-0

19. Payal Sharma, N R Chauhan, Manish Saraswat, (2021); "Impact of Alumina Nanoadditives on Operation and Emission Attributes of Diesel Engine", Journal of Scientific & Industrial Research, JSIR, Vol. 80( 2), pp: 166- 171, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/56125

20. PramodKumar, Pradeep Kumar Singh, Sumit Nagar, Kamal Sharma, Manish Saraswat, (2021); "Effect of different concentration of functionalized graphene on charging time reduction in thermal energy storage system", Materials Today: Proceedings , Elseveir, Vol. 44( 1), pp: 146- 152, ISSN 2214-7853 https://doi.org/10.1016/j.matpr.2020.08.548

21. P Sharma, N R Chauhan, Manish Saraswat, (2021); "Impact of Alumina Nanoadditives on Operation and Emission Attributes of Diesel Engine ", Journal of Scientific & Industrial Research , NISCAIR, Vol. 80( 2), pp: 166- 171, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/56125

22. Naveen Kumar, Ayush Goel, Vipul Verma, Peeyush Kr Gupta, Vishal Gupta, (2020); "Review on the Development of Road Cleaning and Scrap Collecting Robotic Vehicle", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 3( 3), pp: 815- 817, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23032

23. Chetan Rajoria, (2020); "Design and Fabrication of a Remote Controlled Whiteboard Cleaning Mechanism", AEGAEUM JOURNAL, AEGAEUM, Vol. 8( 6), pp: 1763- 1773, ISSN 0776-3808 16.10089.AJ.2020.V8I6.285311.3703

24. RAVI SHANKAR RAMAN,Sandeep Pratap Singh , Tarun Sharma, Sudhir Kumar, (2020); "Optimization of Process using Robust Design (Taguchi Method): An Review", Journal of Engineering, Computing and Architecture, Global Commerce and Communication, Inc., Vol. 10( 5), pp: 376- 981, ISSN 1934-7197 DOI:17.0002.JECA.2020.V10I5.200786.5059

25. Pradeep Kr Singh , Pankaj Kr Singh , Kamal Sharma, Manish Saraswat, (2020); "Effect of Sonication Parameters on Mechanical Properties of In-situ Amine Functionalized Multiple Layer Graphene/Epoxy Nanocomposites", Journal of Scientific & Industrial Research , NISCAIR, Vol. 79( 11), pp: 985- 989, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/55627

26. Gautam Kumar, SachinKumar Sharma,Vivek Tyagi, Prashant,Vineet Pal , Saurabh, (2020); "Stability Model Analysis of Squirrel cage Rotor by Finite Element", Aegaeum, aegaeum, Vol. 8( 6), pp: 1701- 1712, ISSN 07763808

27. Arun Pratap Singh, Dr D K Singh, (2020); "MULTI-RESPONSE OPTIMIZATION FOR MICRO-EDM MACHINING OF AISI D2 DIE STEEL USING RSM AND NEURAL NETWORK", Materials Today: Proceedings, Science Direct S. Bland, Vol. 0( 0), pp: 0- 0, ISSN 2214-7853 https://doi.org/10.1016/j.matpr.2020.09.183

28. Dr. Ravi Shankar Raman, Mr. Amit Verma, (2020); "Application and Implementation of Six Sigma in Manufacturing Industries: A Review ", JOURNAL OF ENGINEERING, COMPUTING & ARCHITECTURE, Global Commerce and Communication, Inc., Vol. 10( 10), pp: 32- 41, ISSN 1934-7197 DOI:17.0002.JECA.2020.V10I10.200786.5141

29. Naveen Kumar, Tushar Anand Sharan, Tushar Rajput , (2020); "Design of Solar Car Chassis", ” International Journal of Trend in Scientific Research and Development (IJTSRD), IJTSRD, Vol. 4( 3), pp: 936- 939, ISSN 2456-6470 https://www.ijtsrd.com/papers/ijtsrd30723.pdf

30. Naveen Kumar, Suraj Vishwakarma , (2020); "Roll Cage and Material Selection", International Journal of Engineering Research & Technology (IJERT) , International Journal of Engineering Research & Technology (IJERT) , Vol. 9( 3), pp: 584- 594, ISSN 22780181 https://www.ijert.org/roll-cage-and-material-selection

31. Neeraj Kumar Sharma, Animesh Kumar, Anmol Sharma, Bodh Prakash Singh, Chirag Tyagi, (2020); "CFD Analysis of convergent-divergent nozzles", aegaeum journal, aegaeum journal, Vol. 8( 6), pp: 1359- 1372, ISSN 0776-3808

32. Anoop Pandey, Harsh Vishwakarma , (2020); "Using QC Tools To Investigate The Problem Of Rejection Of Piston Rings - A Case Study Of Engine Component Manufacturing Organization", INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, IJSTR.ORG, Vol. 9( 4), pp: 2410- 2416, ISSN 2277-8616

33. Manoj Kumar, (2020); "Study of Supply chain Management in Indian Railways", Science and Engineering Journal, Science and Engineering Journal, Vol. 24( 8- 2020), pp: 1- 9, ISSN 0103-944X

34. Priyanshu Kumar Tiwari, Pushkar Verma, Prince Tiwari, Vijay Kumar Gupta, (2020); "Review Paper on New Automotive Camless Engine", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 4( 2), pp: 379- 382, ISSN 2456-6470

35. Anoop Pandey, (2020); "Balancing an oil filter assembly line –An aspect of lean manufacturing", Zeichen Journal, Zeichen Journal, Vol. 6( 7), pp: 181- 186, ISSN 0932-4747

36. Garvjeet Dahiya, Aman Deep Singh, Gaurav Thapliyal, Deepak Katiyar, Hemang Teotia, Ankur Dixit, (2020); "Comparative Performance and Emission Study of Different Viscosity Biofuel Blends for Use in I.C. Engine with a Sustainability Prospective", Aegaeum , Aegaeum Journal , Vol. 8( 8), pp: 86- 99, ISSN ISSN NO: 0776-3808 16.10089.AJ.2020.V8I8.285311.3906

37. Shahrukh Ahmad, Shashi Shekhar Pandey, Mohit Kumar , Netin Kumar Choudhary, Saurabh, (2020); "ELECTRICAL ENERGY REGENERATION IN ELECTRICAL TRANSMISSION SYSTEM: A REVIEW", International Research Journal of Modernization in Engineering Technology and Science, International Research Journal of Modernization in Engineering Technology and Science, Vol. 2( 6), pp: 995- 1005, ISSN 2582-5208

38. Vinay Teotia, Ayush Pathak, Mohnish Yadav, Shivam Sharma & Dharmendra Singh, (2020); "A REVIEW ON DEVICES AND TECHNOLOGIES ON FILTRATION OF AIR POLLUTION", AEGAEUM JOURNAL, AEGAEUM JOURNAL, Vol. 8( 6), pp: 1104- 1113, ISSN 0776-3808 agm.j-3341.115-f.pdf

39. RAVI SHANKAR RAMAN,Yadavalli Basavaraj, (2020); "A Review on Implementation of Six Sigma Strategies in Manufacturing Industries and Benefits Derive", High Technology Letters, Institute of Scientific and Technical Information of China, Vol. 26( 9), pp: 1306- 1311, ISSN 1006-6748

40. Harivans Pratap Singh,Dimri, Priti,Shailesh Tiwari, Manish Saraswat, (2020); "Latent Fingerprint Indexing for Faster Retrieval from Dataset with Image Enhancement Technique", Journal of Scientific & Industrial Research, NISCAIR , Vol. 79( 8), pp: 730- 753, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/bitstream/123456789/55211/1/JSIR%2079%288%29%20730-735.pdf

41. RAVI SHANKAR RAMAN,Sandeep Pratap Singh , Tarun Sharma, Sudhir Kumar, (2020); "Machining Parameters Optimization for the Surface Roughness through Taguchi Analysis", Journal of Engineering, Computing and Architecture, Global Commerce and Communication, Inc., Vol. 10( 5), pp: 345- 351, ISSN 1934-7197 DOI:17.0002.JECA.2020.V10I5.200786.5056

42. R. Khanna, R. Saini, M. Park, G. Ellamparuthy, S.K. Biswal, P.S. Mukherjee, (2020); "Factors influencing the release of potentially toxic elements (PTEs) during thermal processing of electronic waste", Waste Management, Elsevier Ltd, Vol. 105( ), pp: 414- 424, ISSN 0956-053X https://doi.org/10.1016/j.wasman.2020.02.026

43. Pradeep Kr Singh, Pankaj Kr Singh , Kamal Sharma, Manish Saraswat, (2020); "Effect of Sonication Parameters on Mechanical Properties of In-situ Amine Functionalized Multiple Layer Graphene/Epoxy Nanocomposites", JSIR, JSIR, Vol. 79( 11), pp: 985- 989, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/55627

44. Naveen Kumar, Shivendra Singh, Kumar Adhish, Gaurav Singh, Mayank Yadav, Sachin Kishore , (2020); "Oil Spill and Methods to Recover: A Review", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 4( 4), pp: 296- 298, ISSN 2456-6470 https://www.ijtsrd.com/engineering/mechanical-engineering/30935/oil-spill-and-methods-to-recover-a-review/naveen-kumar

45. Garvjeet Dahiya , Aman Deep Singh, Deepak Katiyar , Gaurav Thapliyal , Hemang Teotia , Ankur Dixit , (2020); "Biofuels for Internal Combustion Engines: A review on Economically Sustainable Biofuel", International Research Journal of Engineering and Technology, IRJET, Vol. 7( 8), pp: 146- 152, ISSN 2395-0056

46. Shashwat Kulshreshtha, Shantanu Tiwari, Naman Varshney, Shikhar Verma, Mayank Kushwaha, (2020); "A Review: Design of Effective Braking and Efficient Transmission System", International Journal of Trend in Scientific Research and Development (IJTSRD), International Journal of Trend in Scientific Research and Development (IJTSRD), Vol. 4( 4), pp: 337- 339, ISSN 2456 – 6470

47. Harivans Pratap Singh,Priti Dimri,Shailesh Tiwari, Manish Saraswat, (2020); "Segmentation Techniques through Machine Based Learning for Latent Fingerprint Indexing and Identificatio", Journal of Scientific & Industrial Research, NISCAIR-CSIR, India, Vol. 79( 03), pp: 201- 208, ISSN 0975-1084 JSIR Vol.79(03) [March 2020]

48. Mr. Naveen Kumar, Mr. Vaibhav Chittoria, Mr. Utkarsh Upadhyay , (2020); "Spur Gear Designing and Weight Optimization", International Journal of Engineering Research & Technology (IJERT) , International Journal of Engineering Research & Technology (IJERT) , Vol. 9( 3), pp: 417- 421, ISSN 22780181 https://www.ijert.org/spur-gear-designing-and-weight-optimization

49. Shareq Wajih, Purab Verma, Sahil Yadav, Neeraj, Vivek Chauhan, Vijay Kumar Gupta, (2020); "A Study of Waste Disposal Using a Portable Single- Chambered Incinerator", AEGAEUM JOURNAL, AEGAEUM JOURNAL, Vol. 8( 6), pp: 1546- 1559, ISSN 0776-3808 DOI:16.10089.AJ.2020.V8I6.285311.3680

50. Prasad Eknath Lokhande, Umesh S.Chavan, Abhishek Pandey, (2020); "Materials and Fabrication Methods for Electrochemical Supercapacitors: Overview", Electrochemical Energy Reviews, Springer , Vol. 3( 1), pp: 155- 186, ISSN 2520-8136 https://doi.org/10.1007/s41918-019-00057-z

51. Navendra Pratap Singh, Vipul Kumar, Aayush Kapoor, Apurva Mishra, Vanshdeep Vashishtha, (2020); "Foot Steered Vehicle Design for Differently Abled Persons", Zeichen Journal, signum verlag, Vol. 6( 8), pp: 174- 179, ISSN 0932-4747

52. Mohan Gupta , Kamal Sharma, Manish Sarswat, (2020); "Heat Transfer and Pressure Drop Investigation in a Circular Tube by the use of Various Kinds of Inserts", JSIR, JSIR, Vol. 79( 2), pp: 160- 163, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/53584

53. Sachin Kumar Sharma, Gautam Kumar, Prashant, Vivek Tyagi, Vineet Pal, Saurabh, (2020); "Design and Analysis of Universal Reaper Machine", International Journal of Trend in Scientific Research and Development, International Journal of Trend in Scientific Research and Development, Vol. 4( 4), pp: 1543- 1547, ISSN 2456 – 6470

54. Anoop Pandey, E.H. Ansari, Arjun Singh, (2020); "A Framework to Implement Lean Manufacturing Techniques for Increasing Competitiveness in Indian MSMEs", Aegaeum Journal, Aegaeum Journal, Vol. 8( 9), pp: 47- 60, ISSN 0776-3808

55. Saurabh Kumar, Sanjay Kumar Patel, Vivek Kumar, Ashish Gupta, Anoop Pandey, (2020); "Automotive Transmissions for Adapting Digital Display Technology", International Journal of Emerging Technologies and Innovative Research, IJPUBLICATION, Vol. 7( 6), pp: 869- 877, ISSN ISSN: 2349-5162

56. Anoop Pandey, E.H. Ansari, Arjun Singh, (2020); "A Framework to Implement Lean Manufacturing Techniques for Increasing Competitiveness in Indian MSMEs ", Aegaeum Journal, Aegaeum Journal, Vol. 8( 9), pp: 47- 60, ISSN 0776-3808

57. Harvir Singh, Mayank Kushwaha, (2020); "Design and optimization of an All-Terrain Vehicle roll cage", AEGAEUM JOURNAL, AEGAEUM JOURNAL, Vol. 8( 6), pp: 1735- 1741, ISSN 0776-3808

58. Vijay Kumar Dwivedi , Pooja Pathak , Kamal Sharma, Manish Saraswat, (2020); "Effect of Groove Location on Pressure Profile of Twin Axial Groove Journal Bearing", JSIR, JSIR, Vol. 79( 12), pp: 1049- 1052, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/55735

59. Pikesh Bansal, Manish Saraswat, Kamal Sharma, Nathiram Chauhan, (2020); "Effect of Poissons ratio for liner material on performance of journal bearing under micropolar lubrication", IJETT, SSRG, Vol. 68( 8), pp: 58- 61, ISSN 2231-5381 10.14445/22315381/IJETT-V68I8P211S

60. Mohit Kumar , Shashi Shekhar Pandey , Shahrukh Ahmad , Netin Kumar , Saurabh, (2020); "Self Weight Deformation Analysis of Non Uniform Perforated Steel Plate By Finite Element", aegaeum journal, aegaeum, Vol. 8( 6), pp: 1406- 1414, ISSN 07763808

61. Rahul Verma, Saurabh Rai, Pratyksh Yadav, Rohit Yadav, (2020); "Safer Alternatives to Asbestos in Asbestos-Free Brake Pad Manufacturing: A Review", International Research Journal of Engineering and Technology, International Research Journal of Engineering and Technology, Vol. 7( 7), pp: 2954- 2958, ISSN 2395-0056

62. Naveen Kumar, Tushar Sharma, Vikas Sharma , (2020); "CFD Analysis of Wheel Hub, Paddle Hub and Roll Cage in Solid Works", International Journal of Trend in Scientific Research and Development (IJTSRD) , International Journal of Trend in Scientific Research and Development (IJTSRD) , Vol. 4( 3), pp: 890- 893, ISSN 2456-6470 https://www.ijtsrd.com/papers/ijtsrd30492.pdf

63. Manoj Kumar, Dharni Dhar Yadav, Durgesh Yadav, Mashaba Singh, (2020); "INFRARED PLASTIC SOLAR CELL REVIEW", Aegaeum Journal, Aegaeum Journal (AJ), Vol. 8( 7), pp: 142- 147, ISSN 0776-3808 DOI:16.10089.AJ.2020.V8I7.285311.3716

64. Manish Saraswat, N R Chauhan, (2020); "Comparative assessment of butanol and algae oil as alternate fuel for SI engines", Elseveir, Engineering Science and Technology, an International Journal, ELSEVEIR, Vol. 23( 1), pp: 92- 100, ISSN 2215-0986 (Online) https://doi.org/10.1016/j.jestch.2019.04.002

65. Vijay Kumar Gupta, Puru Raj Verma, Prince Malik, Rajat Singh Chauhan, Veeresh Vishwakarma, (2020); "Design and Static Structural Analysis of Disc Brake Rotor", AEGAEUM JOURNAL, AEGAEUM JOURNAL, Vol. 8( 6), pp: 1436- 1445, ISSN 0776-3808 DOI:16.10089.AJ.2020.V8I6.285311.3667

66. Animesh Kumar, Neeraj Sharma, Sanjay Kumar, (2020); "MECHANICAL ASSESSMENT OF COMPOSITE MATERIAL (Al-6061) REINFORCED WITH MARBLE DUST", Aegaeum, Aegaeum, Vol. 8( 6), pp: 1446- 1452, ISSN 0776-3808

67. Manoj Kumar, (2020); "Management Of Indian Railways Supply Chain Management", Aegaeum Journal, Aegaeum Journal (AJ), Vol. 8( 7), pp: 1084- 1091, ISSN 0776-3808 DOI:16.10089.AJ.2020.V8I7.285311.3815

68. Anoop Pandey, (2020); "Balancing an oil filter assembly line –An aspect of lean manufacturing ", Zeichen Journal, Zeichen Journal, Vol. 6( 7), pp: 181- 186, ISSN 0932-4747

69. Sanjay Kumar,Animesh Kumar, (2020); "Fabrication of Can-Crusher Using Quick-Return Mechanism", AEGAEUM JOURNAL, AJ, Vol. VOL 8( ), pp: 1- 6, ISSN 0776-3808

70. PARAG SINGHAL, (2020); " Performance Improvement In Air Conditioning By Using Heat Pipe ", AEGAEUM JOURNAL, AEGAEUM JOURNAL, Vol. 8( 6), pp: 1742- 1753, ISSN 0776-3808

71. Anuj Kumar Jain, Vikas Rastogi, Atul Kumar Agrawal, (2019); "Commentary on, “Discussion on ‘A novel approach to study the effects of asymmetric stiffness on parametric instabilities of multi-rotor-system’ by Jain et al., Journal of Sound and Vibration 413 (2018) 159e172.”", Journal of Sound and Vibration, Elsevier, Vol. 448( ), pp: 259- 264, ISSN 0022-460X https://doi.org/10.1016/j.jsv.2019.01.052

72. RAVI SHANKAR RAMAN , Dr. Yadavalli Basavaraj, (2019); "Quality Improvement of Capacitors through Fishbone and Pareto Techniques", International Journal of Recent Technology and Engineering, Blue Eyes Intelligence Engineering & Sciences Publication, Vol. 8( 2), pp: 2248- 2252, ISSN 2277-3878

73. Vijay Kumar Gupta, Himanshu Singh, Kunwar Utkarsh, Ankit Kumar, Abhinav Kumar Vishwakarma, Mohak Gupta, (2019); "Automatic Temperature Controlled Air Cooler: Design, Assembly and Testing ", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 3( 3), pp: 1334- 1336, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23327

74. Abhay Katiyar, Abhishek Gaur, Aviral Shrivastava, Mohd Ahmar Khan, Navneet Pratap Singh, Dr. Rahul Saini, Gaganpreet Kaur, (2019); "Design and Construction of a Shredding Machine for Recycling and Management of Organic Waste", International Journal of Trend in Scientific Research and Development (ijtsrd), IJTSRD, Vol. 3( 4), pp: 707- 712, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23889

75. Himanshu Kumar Singh ,Kishan Ji Srivastava, Parmanand Pal, Ragvendra Mishra, Manabendra Saha, (2019); "Development and Optimization of Process Parameters of Microwaved Cured Polymer Based Natural Fibre (Coir) Reinforced Composite", International Journal of Trend in Scientific Research and Development, International Journal of Trend in Scientific Research and Development, Vol. 3( 4), pp: 93- 97, ISSN 2456-6470 10.31142/ijtsrd23595

76. Naveen Kumar, Suryansh Mishra , (2019); "Review on Four Wheel Steering System", International Journal for Scientific Research & Development , IJSRD, Vol. 7( 9), pp: 542- 544, ISSN 2321-0613 http://ijsrd.com/Article.php?manuscript=IJSRDV7I90356

77. Manish Mangal, Vivek Singh, Shailendra Pratap Singh, (2019); "Finite Difference Analysis of Plane Couette Flow using MATLAB", Journal of Experimental & Applied Mechanics, STM, Vol. 10( 1), pp: 17- 22, ISSN 2230-9845

78. Ankur Dixit, Shivam Gupta, Shivam Varshney, Shubham Mehrotra, Utkarsh Bhan, (2019); "Analysis of Emission on Variable Compression Engine with using Biogas as a Fuel", International Journal of Scientific & Engineering Research, IJSER, Vol. 10( 4), pp: 1359- 1364, ISSN 2229-5518

79. Dr. Pikesh Bansal | Abhinav Srivastava | Aadil Zaya | Bhuvnesh Sharma | Anuj Upadhyay, (2019); "Design and Fabrication of Automatic Speed Controller for Automobile", International Journal of Trend in Scientific Research and Development (IJTSRD), IJTSRD Publication, Vol. 3( 4), pp: 524- 527, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23846

80. Mohd Khurshed Rashid, Sankalp Srivastava, Shubham Srivastava, Vishal Ashok Kumar, Animesh Kumar, (2019); "EXPERIMENTAL STUDY OF MECHANICAL PROPERTIES ON AL 6063 COMPOSITE REINFORCED WITH SILICON CARBIDE", IJRTI, IJRTI, Vol. 4( 4), pp: 67- 72, ISSN 2456-3315

81. Navendra Pratap Singh, Anant Agrawal, Anas Khan, Anil Kumar Rajpoot, Anshul Verma, Sandeep Kumar Verma, (2019); "Automatic Bike Side Stand", International Journal of Research in Engineering, Science and Management, RESAIM Publishing, Vol. 2( 4), pp: 285- 286, ISSN 2581-5792

82. Abhishek Sharma, Dharmendra Singh, C. Vivekanandhan, Yashvir Singh, Ibrahim Mustefa, (2019); "Experimental Investigations on the Influence of Fuel Pressure on Single Cylinder C.I. Engine Fuelled with Different Polanga Biodiesel Blends", Journal of Aerospace Engineering & Technology, stm journals, Vol. 8( 2), pp: 58- 66, ISSN 2231-038X https://doi.org/10.37591/.v8i2.149

83. Jainendra Kumar, K Mathiyazhagan, Rajeev Ranjan, Anuj Kumar Jain, (2019); "Optimize and validate the wind Induced deflection of Process column in offshore oil and gas industry", Journal of Scientific and Industrial Research, NISCAIR-CSIR, India, Vol. 78( ), pp: 458- 465, ISSN 0975-1084

84. Naveen Kumar, Vaibhav Setia, Sunil Kumar Patel, Satyam Upadhyay, Saurabh Chauhan, Prakhar Bajpai , (2019); "Analysis of Energy Generation from Exhaust of Automobile using Peltier (Thermoelectric Generator)", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 3( 3), pp: 749- 751, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd22986

85. Dr. Rahul Saini, Naveen Kumar, Desh Deepak, Ashutosh Kushwaha, Ambrish Pandey, (2019); "Multi-Operational Machining and Controlling with the Help of Electro-Magnetic Clutch", International Journal of Trend in Scientific Research and Development (ijtsrd), IJTSRD, Vol. 3( 3), pp: 1018- 1021, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23181

86. Shubham Singh , Jitendra Sharma,, Ujjwaldeep, Krishna Gupta, Manabendra Saha, (2019); "DEVELOPMENT AND OPTIMIZATION OF PROCESS PARAMETERS OF MICROWAVED CURED POLYMER BASED NATURAL FIBER REINFORCED COMPOSITE", Journal of Emerging Technologies and Innovative Research, Journal of Emerging Technologies and Innovative Research, Vol. 6( 5), pp: 581- 585, ISSN 2349-5162

87. Naveen Kumar, Udit Singhal , (2019); "A Review Paper on Fin Efficiency Enhancement", International Journal of Trend in Scientific Research and Development (IJTSRD), International Journal of Trend in Scientific Research and Development (IJTSRD) , Vol. 4( 1), pp: 901- 904, ISSN 2456-6470 https://www.ijtsrd.com/papers/ijtsrd29543.pdf

88. Ajit Singh Shekhawat, Nikesh Kumar, Roopal Yadav, Siddharth Tyagi, Arun Pratap Singh, (2019); "Smart Solar Grass Cutter Robot ", International Journal of Trend in Scientific Research and Development (IJTSRD), International Journal of Trend in Scientific Research and Development, Vol. 3( 3), pp: 1479- 1481, ISSN 2456 - 6470 https://doi.org/10.31142/ijtsrd23320

89. RAVI SHANKAR RAMAN , Dr. Yadavalli Basavaraj, (2019); "Defect reduction in a capacitor manufacturing process through Six Sigma concept: A case study", Management Science Letters, Growing Science, Vol. 9( 2), pp: 253- 260, ISSN 1923-9343

90. Animesh Kumar, Om Singh Patel, Nishi Yadav, Pooja Shakya, (2019); "Reduction in Size of Vars by using Different Materials in Generator", IJTSRD, IJTSRD, Vol. 3( 3), pp: 1589- 1591, ISSN 2456-6470

91. Mr. Parag Singhal1, Tarun Chaudhary2, Shardul Kumar Vijay2, Tauheed Akhtar2, Vaibhav2, Ravin Singh2 , (2019); "Thermoelectric Air Conditioning ", International Journal of Trend in Scientific Research and Development (IJTSRD), International Journal of Trend in Scientific Research and Development (IJTSRD), Vol. 3( 3), pp: 1728- 1730, ISSN 2456 - 6470

92. Naveen Kumar, Satyam Upadhyay, Vaibhav Setia, Sunil Kumar Patel, Saurabh Chauhan , (2019); "Air Conditioning Using Exhaust of a Vehicle", International Journal of Scientific & Engineering Research , International Journal of Scientific & Engineering Research , Vol. 10( 4), pp: 120- 130, ISSN 2229-5518 https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjR_pb-9LjsAhXvzTgGHXqFD28QFjAAegQIAhAC&url=https%3A%2F%2Fwww.ijser.org%2Fresearchpaper%2FAir-Conditioning-Using-Exhaust-of-a-Vehicle.pdf&usg=AOvVaw0oMvZSYup2dlc-fkDzbw-U

93. Ayush Patel, Mayank Srivastava, Archit, Kshitij Srivastava, Vijay Kumar Gupta, (2019); "Design of Fin for Various Variables ", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 3( 4), pp: 514- 520, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd23829

94. Dr. Rahul Saini, Naveen kumar, Ambrish Kumar Pandey, Ashutosh Khuswaha, Desh Deepak, (2019); "Multi-Functional Machine with Electro- Magnetic Clutch", International Journal of Civil, Mechanical and Energy Science, International Journal of Civil, Mechanical and Energy Science, Vol. 5( 3), pp: 1- 6, ISSN 2455-5304 https://dx.doi.org/10.22161/ijcmes.5.3.1

95. Naveen kumar, Syed Fozail Ahmad , (2019); "A Comparative Overview on the Horizontal Axis and the Vertical Axis wind Turbines", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 4( 1), pp: 1105- 1108, ISSN 2456-6470 https://www.ijtsrd.com/papers/ijtsrd29697.pdf

96. Anand Prakash, Shiv Ranjan Kumar, Rahul Verma, (2019); "Vibration analysis of functionally graded materials for cylinder liner used in agricultural engine part", Open Agriculture , Walter de Gruyter, Vol. 4( 1), pp: 258- 266, ISSN 2391-9531 https://doi.org/10.1515/opag-2019-0024

97. Chetan Rajoria, Ayush Johri, Harshit Nangia, Abhinav Goswami, Alok Shukla, Ajeet Kumar Yadav, (2019); "Study of Effect of Friction on the Pin of Pantograph Mechanism", IJTSRD, IJTSRD, Vol. 3( 3), pp: 1353- 1356, ISSN 2456-6470

98. Manish Saraswat, N R Chauhan, (2019); "Environmental Impact of Butanol and Algae Oil addition in Gasoline at different Compression Ratio", JSIR, JSIR, Vol. 78( 6), pp: 382- 385, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/47554

99. Uttam Panwar, Yash Guryal, Shivam Srivastava, Prakhar Singhal, Mr Arun Pratap Singh, (2019); "OPERATING MECHANISM AND DESIGN OF HYDRAULIC SCISSOR LIFT", International Research Journal of Engineering and Technology (IRJET), International Research Journal of Engineering and Technology, Vol. 6( 4), pp: 3981- 3988, ISSN 2395-0056

100. Avinash Pratap Singh, Kuldeep Singh, Aman Jain, Arun Kapoor, Ankit Kumar, Abhishek Pandey, (2019); "Self-Healing Capabilities in Polymeric Materials: An Introduction to Techniques", International Journal of Trend in Scientific Research and Development, International Journal of Trend in Scientific Research and Development, Vol. 3( 4), pp: 735- 738, ISSN 2456 - 6470 https://www.ijtsrd.com/papers/ijtsrd23886.pdf

101. Yadvendra Kumar Mishra, Arun Kumar Singh, Dharmendra Singh, Gashaw Getenet, (2018); "Effect of Ni Addition on the Hardness and Tensile Strength of Al-Cu Alloy Prepared by Powder Metallurgy Technique", Journal of Experimental & Applied Mechanics, stm journals, Vol. 9( 3), pp: 19- 22, ISSN 2230-9845 (Online), ISSN: 2321-516X (Print) https://doi.org/10.37591/joeam.v9i3.1458

102. Divyansh Garg, Shubham Kaushiek, Vaibhav Kumar1, Dharmendra Singh, (2018); "Condition-based Monitoring and Fault Diagnostics of a Machine", Journal of Experimental & Applied Mechanics, stm journals, Vol. 9( 2), pp: 84- 89, ISSN 2230-9845 (Online), ISSN: 2321-516X (Print) https://doi.org/10.37591/joeam.v9i2.835

103. Manish Saraswat, Nathi Ram Chauhan, (2018); "Biophysiochemical Analysis of Algae-Gasoline and Butanol-Gasoline Blended Fuels", Journal of Energy Environment and Carbon Credits, STM, Vol. 8( 1), pp: 1- 7, ISSN 2249-8621 https://doi.org/10.37591/joeecc.v8i1.593

104. Manish Saraswat, N R Chauhan, (2018); "Assessment study of butanol-gasoline blends in variable compression ratio spark ignition engine", JSIR, JSIR, Vol. 77( 7), pp: 405- 409, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/44672

105. Dharmendra Singh, Divyansh Garg, Abhishek Sharma, V.R. Mishra, (2018); "Approach for Machine Health Monitoring System of a Machine", International Journal of Engineering & Technology , Science Publishing Corporation Publisher of International Academic Journals, Vol. 7( 4), pp: 441- 446, ISSN 2227-524X 10.14419/ijet.v7i4.39.24121

106. Naveen Kumar, Shivam Tyagi, Vaibhav Prajapati, Saurabh Kumar , (2018); "Thermal Imaging based Search Operation using Drone", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 2( 4), pp: 928- 930, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd14192

107. Naveen Kumar, Shivam Gupta, Shubham Mehrotra, Utkarsh Bhan, Vaibhav Setia , (2018); "A Review on Effect of Aluminium and Silicon Powder on Response Variables in Powder Mixed EDM", STM JOURNALS, Trends in Electrical Engineering , Vol. 8( 3), pp: 1- 7, ISSN 2249-4774 https://doi.org/10.37591/.v8i3.845

108. Manish Saraswat, Nathi Ram Chauhan, (2018); "Performance and Emission Analysis of Different Alcoholic-Blended Fuels in Spark-Ignition Engines", Journal of Alternate Energy Sources and Technologies, STM, Vol. 9( 2), pp: 15- 32, ISSN ISSN: 2230-7982 (Online), ISSN: 2321-5186 (Print) https://doi.org/10.37591/joaest.v9i2.967

109. Chetan Rajoria, Deepali Gautam, Harsh Rajput, Abhinav Vats, Amit Singh, (2018); "Design and Fabrication of A Foot Operated Washing Machine", IJTSRD, IJTSRD, Vol. 2( 4), pp: 1241- 1243, ISSN 2456-6470

110. Manish Saraswat, N R Chauhan, (2018); "Performance Evaluation of Algae Oil -Gasoline Blends in Variable Compression Ratio Spark Ignition Engine", JSIR, JSIR, Vol. 77( 12), pp: 723- 727, ISSN 0975-1084 (Online); 0022-4456 (Print) http://nopr.niscair.res.in/handle/123456789/45481

111. Manabendra Saha, S.S. Dhami, (2018); "Effect of TIG Welding Parameter of Welded Joint of Stainless Steel SS304 by TIG Welding", Trends in Mechanical Engineering & Technology, STM JOURNAL, Vol. 8( 3), pp: 18- 27, ISSN 2347-9965

112. Animesh Kumar, Divyansh Singh, Aman Deep Singh, Mayank Chauhan, Keshav Nath Chaturvedi, Amit Singh, (2018); "Optimization of Fin and Tube Heat Exchanger", IJISRT, IJISRT, Vol. 3( 5), pp: 791- 795, ISSN 2456-2165

113. Aditya Sharma, Sharad Bhardwaj, Pavan Kumar Kankar, (2018); "Fault diagnosis of rolling element bearings using fractional linear prediction and AI techniques", Life Cycle Reliability and Safety Engineering , Springer, Vol. 8( 2019), pp: 11- 19, ISSN 2520-1360 https://doi.org/10.1007/s41872-018-0062-8

114. Jainendra Kumar, Saqib Zaidi, Anuj Kumar Jain, Jag Parvesh Dahiya, (2018); "A Review on Shell and Tube Heat Exchanger Design Optimization", Trends in Machine Design, STM Journals Publication, Vol. 5( 2), pp: 42- 53, ISSN 2455-3352 https://doi.org/10.37591/tmd.v5i2.847

115. Sarvesh Thakur, Vijay Kumar Gupta, Abhishek Sharma, Dharmendra Singh, (2018); "Design of Fixed Wing Unmanned Aerial Vehicle based on Magnificent Frigatebird", Science Publishing Corporation Publisher of International Academic Journals, Science Publishing Corporation Publisher of International Academic Journals, Vol. 7( 4), pp: 165- 168, ISSN 2227-524X 10.14419/ijet.v7i4.39.23833

116. RAVI SHANKAR RAMAN,Mr.Himanshu Chauhan,Mr. Ankit Negi, (2018); "DMAIC Approach for Road Wellbeing: A Case Study ", International Journal of Engineering & Technology, Science Publishing Corporation Inc, Vol. 7( ), pp: 8- 11, ISSN 2227524X

117. Satyaveer Singh, N.Yuvaraj, Kaleem Uz Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Naveen kumar , (2018); "Multi-response Optimization of Friction Stir Welding Process Parameters Using Standard Deviation (SD) Based Preference Indexed Value (PIV) Method", International journal of advanced production and industrial engineering IJAPIE, International journal of advanced production and industrial engineering IJAPIE, Vol. 3( 4), pp: 44- 48, ISSN 2455–8419 http://ijapie.org/Impdocs/Vol3/IJAPIE-2018-10-429.pdf

118. Arun Pratap Singh, Shikha Tripathi, Dr D K Singh, (2018); "Modeling of Material Removal Rate in Micro EDM Using Neural Network", International Journal of Microelectronics and Digital Integrated Circuits, Journals Pub, Vol. 4( 1), pp: 1- 10, ISSN 2456-3986

119. Animesh Kumar, Divyansh Singh, Aman Deep Singh, Mayank Chauhan, Keshav Nath Chaturvedi, Amit Singh, (2018); "Optimization of Fin and Tube Heat Exchanger", IJISRT, IJISRT, Vol. 3( 5), pp: 791- 795, ISSN 2456-2165

120. Naveen Kumar, Shivam Tyagi and Vishal Tripathi , (2018); "Prototype of Automatic Fan", International Journal of Trend in Scientific Research and Development, IJTSRD, Vol. 2( 4), pp: 925- 927, ISSN 2456-6470 https://doi.org/10.31142/ijtsrd14191

121. Anurag Kumar, Abhishek Pandey, (2017); "Cost Assessment of Hydrokinetic Power Generation", International Journal of Advance Research in Science and Engineering, International Journal of Advance Research in Science and Engineering, Vol. 6( 2 Special), pp: 224- 233, ISSN 2319-8354 https://www.ijarse.com/images/fullpdf/1514970772_TE01-036.pdf

122. Devesh Tripathi , Sachendra, Abhishek Pandey, (2017); "Design and Optimization of a Reconfigurable manufacturing system", International Journal of Advance Research in Science and Engineering, International Journal of Advance Research in Science and Engineering, Vol. 6( 2 Special), pp: 671- 679, ISSN 2319-8354 https://www.ijarse.com/images/fullpdf/1514973890_MM03-034.pdf